EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: vsboost on August 09, 2021, 07:35:29 am

Title: Longwei K3010d problem cant go below 5v
Post by: vsboost on August 09, 2021, 07:35:29 am

Just posting this to help out anyone with the issue where the supply shoots down to 0v when going below ~ 5.6v the problem might be two of the three connections on the voltage adjustment pot might be reversed.

See attachment

Title: Re: Longwei K3010d problem cant go below 5v
Post by: jeeek on January 04, 2023, 01:13:10 am

HEY. what is the value of T2?