Products > Test Equipment

Looking for an alternative for sigrok

<< < (3/4) > >>

sslupsky:

--- Quote from: artag on August 22, 2024, 07:07:13 pm ---I would love to be able to build a self-contained open-source oscilloscope/LA.

--- End quote ---

The ThunderScope project is nearing the point of launching a campaign.  Testing seems to be going well.  It is only an oscilloscope at this point but there are possibilities for a lot of added capability.  The ngscopeclient project supports the ThunderScope which is how I came to know about ngscopeclient.  There is a discord channel where you can follow along with the development progress.

https://github.com/EEVengers/ThunderScope

fredo_:

--- Quote from: sslupsky on August 22, 2024, 06:22:18 pm ---ngscopeclient looks interesting though it does not appear to support as many instruments as sigrok does:
https://www.ngscopeclient.org

--- End quote ---
Thank you @sslupsky and @artag for pointing ngscopeclient out !
I spent some time playing with it and it's a very impressive software  :-+
It surely isn't as beginner-friendly as Sigrok/Pulseview but it seams much more powerful, especially in the analog domain.

The first challenge is to get a binary distribution, since you have to build it yourself from the source code (at least I was not able to find a downloadable version  :-//...) !
Then the current version does not work with latest Siglent SDS 2000X HD firmware: I had to patch it to have it support frame length reported in points rather than bytes.
In anyone is interested, I can start new thread to share a downloadable windows installer for this patched version.

Furna:

--- Quote from: fredo_ on August 26, 2024, 10:47:16 pm ---The first challenge is to get a binary distribution, since you have to build it yourself from the source code (at least I was not able to find a downloadable version  :-//...) !
Then the current version does not work with latest Siglent SDS 2000X HD firmware: I had to patch it to have it support frame length reported in points rather than bytes.
In anyone is interested, I can start new thread to share a downloadable windows installer for this patched version.

--- End quote ---

Hello fredo_ !

Challenges are juice of live.
I'll try to compile ngscopeclient on Windows/MSYS2 probably during week end 31/8 - 1/9
A new dedicated thread (not only for Windows) for ngscopeclient on EEVBlog forum sounds a good idea to me if one does not yet exists (I didn't find one).

cedric!:
Recently, sigrok has released the scripts needed to build it. Now everybody can build their own fork of sigrok/pulseview with a github action:

https://github.com/sigrokproject/sigrok-build/actions

Furna:

--- Quote from: cedric! on September 07, 2024, 04:08:12 pm ---Recently, sigrok has released the scripts needed to build it. Now everybody can build their own fork of sigrok/pulseview with a github action:

https://github.com/sigrokproject/sigrok-build/actions

--- End quote ---

I am wondering if on the next version of Windows you will be able to install a compiler or you wil be forced to go to Github ... and pay a subscription.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod