EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: 0xfede on March 22, 2018, 02:54:58 pm
-
Hello all,
I'm looking around for an isotropic RF strength meter with PC interface. The main use is as a feedback for RF generator to check CISPR11 immunity precompliance. The radiated level should be 10V/m and 20V/m (+-10% IIRC) from 70MHZ to 2.7GHZ.
There are a lot of low cost devices around but none offers a PC interface and their accuracy is a big question.
There are a few active antennas (that I can connect to a SA) but I don't have any experience.
Then the classic Chavin Arnoux CA43 could be a solution but it is rather expensive (3k€ + VAT).
I don't need a class A instrument, just something to be in the right ballpark.
Any advice?
Thanks,
0xfede