Products > Test Equipment
Looking for Lecroy Waverunner Xi series service manual
Kirkhaan:
I've searched the forum and think this has not been asked before:
Does anyone happen to have the service manual for the Lecroy Waverunner Xi series?
Is it available publicly anyhow?
I have a Waverunner 44Xi here from 2006 which has boot issues.
The service manual will make my troubleshooting much easier 8)
Thanks in advance!
abraxa:
I haven't seen a service manual around. What boot issues do you have? Maybe it's just the hard drive and/or the data on it that's causing them.
Kirkhaan:
I'm getting attached screen at start-up.
After BIOS reset the display works again and shows me a normal startup procedure until "verifying DMI pool data".
After that the screen stays black (also on the VGA output). Normally I would expect the Windows XP start-screen.
So I guess indeed there is something corrupt on the HDD.
I guess I have to start looking into the Recovery Tools and Procedures from Lecroy...
abraxa:
If I were in your situation, I'd do the following:
- make a bootable USB stick (e.g. using LinuxLive USB Creator)
- boot the scope from the USB stick
- copy the hard drive to an external hard drive ("mkdir /mnt/sdb; mount /dev/sdb /mnt/sdb; dd if=/dev/sda /mnt/sdb/lecroy.img" or similar - just be careful, dd can wipe your harddrive if you don't know what you're doing; when in doubt, ask)
- copy the calibration data on D: to the USB stick as well, just to have it in two places because you're in trouble when you no longer have it
- reboot
- unplug the USB drive and USB stick
- follow the recovery instructions: http://cdn.teledynelecroy.com/files/manuals/scope_system_recovery_instructions.pdf
Kirkhaan:
Thanks for your help abraxa! Really appreciate it.
I plan to start working on it next week. Will keep you informed.
Navigation
[0] Message Index
[#] Next page
Go to full version