Products > Test Equipment
Low cost logic analyzer probe for Rigol MSO5000 EasyEDA project
<< < (12/30) > >>
Gandalf_Sr:

--- Quote from: S. Petrukhin on October 23, 2020, 12:56:23 am ---The Rigol MSO5074 specification states that the maximum LA frequency is 200 MHz.  :)

--- End quote ---
Yes, they are saying that they don't spec for logic clock frequencies higher than 200 MHz but you need at least double this as the sampling rate; again, I am pretty sure that the MSO5000 samples the LA pins at 1 GHz, that's why there's a 1 nS jitter when you're looking at 200 MHz waveforms.
Gandalf_Sr:

--- Quote from: Sharp on November 10, 2020, 03:45:08 pm ---@hydrabus and @Petrukhin

Thank you for your excellent work - very appreciated    ^-^

Are we now looking into two deterrent designs and two deferent tests ? or are you working together on this project ?

--- End quote ---
The 2 projects are both LA probe leads that plug into the Rigol MSO5000 series scopes but they are completely different designs.

Mine came first.  I have looked at S.Petrukhin's design and offered him my advice and what I believe is constructive criticism.  I am not running a business (at least not one selling LA probe PCBs) and I don't feel like I'm in competition here.

[EDIT] I now realize that you were asking about Hydrabus' design vs S.Petrukhin's.  I have a completely unrelated design here.
S. Petrukhin:

--- Quote from: Sharp on November 10, 2020, 03:45:08 pm ---@hydrabus and @Petrukhin

Thank you for your excellent work - very appreciated    ^-^

Are we now looking into two deterrent designs and two deferent tests ? or are you working together on this project ?

--- End quote ---
I quickly made a simple version myself which is easy to repeat by ordering PCB and accessories in a couple of clicks.. I was really helped by the guys in this forum, who studied and gave information about the standard device. @Gandalf_Sr especially helped-he found errors and suggested them to me. @hydrabus upgraded the board and made an independent version.
simogi:

Good evening,
I just bought a rigol mso5000.
I came across this blog.
I went to the Chinese site:
https://easyeda.com/f33net/digital-probe-rigol-mso5000

I saw an opportunity to purchase components.
But I don't see an opportunity to buy the board.

I know it's a simple question but can you help me?

Simogi
S. Petrukhin:

--- Quote from: simogi on November 26, 2020, 10:33:31 pm ---
Good evening,
I just bought a rigol mso5000.
I came across this blog.
I went to the Chinese site:
https://easyeda.com/f33net/digital-probe-rigol-mso5000

I saw an opportunity to purchase components.
But I don't see an opportunity to buy the board.

I know it's a simple question but can you help me?

Simogi

--- End quote ---

Hi!

I answered you on that site: you need to open the PCB in the Editor (see this name button) and select [Fabrication / PCB Fabrication file (PCB)] from the menu there. Then choose when ordering 5 pieces - they will cost $2 plus shipping.

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod