EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: perdrix on June 18, 2018, 05:36:57 pm

Title: Manual for Datron (Wavetek) 4600 Autocal Transconductance Amplifier
Post by: perdrix on June 18, 2018, 05:36:57 pm

Can be downloaded from <https://groups.io/g/Datron-Wavetek/files>

I'll be uploading the manuals for the 4808 as I get them scanned over the next week or so.

All the best
David Partridge

Title: Re: Manual for Datron (Wavetek) 4600 Autocal Transconductance Amplifier
Post by: pelule on June 19, 2018, 05:23:06 pm

Hi David

thanks for uploading - I was searching for the DOC since a long time.
/PeLuLe

Title: Re: Manual for Datron (Wavetek) 4600 Autocal Transconductance Amplifier
Post by: perdrix on August 20, 2018, 11:48:51 am

I've uploaded a better version of this scan to:

https://groups.io/g/Datron-Wavetek/files/Datron%204600/Datron%20Wavetek%204600%20Autocal%20Transconductance%20Amplifier%20User%27s%20Handbook.pdf (https://groups.io/g/Datron-Wavetek/files/Datron%204600/Datron%20Wavetek%204600%20Autocal%20Transconductance%20Amplifier%20User%27s%20Handbook.pdf)

and have deleted the old one.

Regards
David Partridge

Title: Re: Manual for Datron (Wavetek) 4600 Autocal Transconductance Amplifier
Post by: perdrix on August 20, 2018, 03:08:08 pm

I just uploaded this again after reprocessing it somewhat differently so it is *much* smaller and clearer as well:

https://groups.io/g/Datron-Wavetek/files/Datron%204600/Datron%20Wavetek%204600%20Autocal%20Transconductance%20Amplifier%20User%27s%20Handbook.pdf

So if you downloaded the earlier upload, please download again (new version is about 10MB rather than about 60MB).

Cheers
Dave