Products > Test Equipment
Trying to display bandwith via Math on Siglent SDS2k+/2kHD/800X HD
<< < (19/19)
Performa01:
Okay, we are slowly getting a bit off-topic here (discussing the output filtering in an SDG7000A AWG instead of displaying bandwidth on an entry level DSO), but then again, the problems that led to the actual topic will be solved at one point. In the meantime, we can look at noisy spectra, e.g. from 3.6 to 4.2 GHz for our trusty old Sync pulse, designed by gf:


SA44_Sinc_Gf-AWG1200_3.9GHz

As we can see, we can see nothing...

Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod