| Products > Test Equipment |
| Micsig dp10007 or dp750-100 differential probe |
| << < (3/4) > >> |
| Micsig_support:
--- Quote from: H.O on August 27, 2022, 09:57:23 am ---I just found that the probes on the DP750-100 can be disassembled, possibly opening up for custom probe adapters. I have no idea what type of connector it is though. Contrary to my inital thought it looks like the shielding extends all the way down to the finger guard of the probe itself. --- End quote --- ' this is not the connector. not for any probe adapters. |
| H.O:
Thanks for the input. OK, then what is it? :-) Obviously I wasn't talking about any of the included accessories (the crockodile clips, probe tips and/or the grabbers). What I was talking about was making a custom probe assembly completely replacing the bulky multimeter probes with something more useful for low(ish) voltage probing on PCBs (a CAN bus for example). Do you have any input on the issue with the probe offset jumping all over the place when touching/moving the BNC connector housing connected to the scope? Is this normal? I've tried on two scopes and it does the same thing. I can send a video if you want. |
| pbs74:
I have not had a chance to proceed with a purchase yet (still in favor of new DP750 though), but just saw this recent Youtube review of it (including measuring against DP10013) and wanted to share/attach to this thread in case of value for others |
| pbs74:
--- Quote from: Micsig_support on August 30, 2022, 10:40:52 am ---this is not the connector. not for any probe adapters. --- End quote --- Hi Micsig_support, I see a number of different specs on the DP750-100 CMRR - on Micsigs own website, datasheet and product page have different specs, and I also see different specs quoted across resellers. Can you please confirm the correct CMRR numbers? Thanks, Peter |
| pbs74:
--- Quote from: H.O on August 22, 2022, 05:33:30 am ---I have a DP750-100. I had my mind set on the DP10007 due to its 10/100 attenuation but got the the DP750-100 instead. For measuring differential bus signals (RS485 etc) it works perfectly fine, see this post for example. I can't comment on CMMR and I have only used for a couple of hours total so take this for what it is. --- End quote --- Hi H.O., I put my hobby a bit on hold, but looking to purchase diff probe now. How have your experience with the DP750 been the last half year, still satisfied and would recommend it? |
| Navigation |
| Message Index |
| Next page |
| Previous page |