| Products > Test Equipment |
| Micsig Tablet Oscilloscope tBook mini TO1104 review (100Mhz 4 channel 'scope) |
| << < (25/37) > >> |
| jjoonathan:
--- Quote --- --- Quote from: jjoonathan on July 31, 2017, 06:17:45 am ---Darn, I just heard from micsig sales that the tBook mini TO1104M (28Mpt model) that I bought a few months ago won't support decodes. Decodes are only supported on the tBook mini TO1104 :( Amusingly, the updated .bin file is named "TO1104M Firmware Program, Version Info 7...227" but it dies with "Version of upgrade package was wrong!" so sales is probably right. --- End quote --- Sorry if I missed it, are M and non-M models different inside (never seen M-models in tear downs)? Ask sales if you can upgrade your unit (may some soldering required :)). Or, may be you can arrange an exchange... Concerning firmware. I believe all models use the same file (I checked this with MD5). The firmware file is rejected if it's not newer than the version installed. BTW, here is what written in the firmware header: "TO1104,TO1074,TO1074M,TO1104M" --- End quote --- Would you happen to have a copy of the .bin? I can't find 273 on the downloads page and the network upgrade assures me that "Current version is latest!" even though I have 6.11.0.192 installed so both 227, the version on the downloads page, and 273, the version reported by nctnico, should be newer. If that doesn't work, I'll definitely go poking around. Thanks for the info on the header -- there's enough version confusion from Micsig's direction that it's worth investigating, and thanks to Mike's wonderful teardown video I have an excellent point of comparison :) |
| kirill_ka:
--- Quote from: jjoonathan on July 31, 2017, 12:24:51 pm ---Would you happen to have a copy of the .bin? I can't find 273 on the downloads page and the network upgrade assures me that "Current version is latest!" even though I have 6.11.0.192 installed so both 227, the version on the downloads page, and 273, the version reported by nctnico, should be newer. --- End quote --- Take a look at xml, it contains direct links to current firmware files. https://www.eevblog.com/forum/testgear/micsig-tablet-oscilloscope-tbook-mini-to1000/msg1093979/#msg1093979 |
| jjoonathan:
Thanks for the link, krill_ka! The secret was to ignore "upgrade_TO1104M.bin", download "upgrade_TO1104.bin" on a flash drive using the URL from the .xml (there is no TO1104.bin on the official downloads page), rename it to "upgrade_TO1104M.bin", and run it ::) --- Code: ------------ Gory Details -------- Model: TO1104M Version: 6.11.0.192 Auto upgrade: "Current version is latest!" http://www.micsig.com.cn/upgrade/config.xml * = had <model>TO1104M</model> tag ! = 404 Not Found !upgrade_TO1104_V5.bin: 5.0.125 upgrade_TO1072.bin: 6.1.273 *upgrade_TO1074.bin: 6.1.273 upgrade_TO1102.bin: 601.1.273 *upgrade_TO1104.bin: 601.1.273 upgrade_TO1102M.bin: 701.1.273 *upgrade_TO1104M.bin: 701.1.273 Effects of placing on flash drive and selecting UDisk Upgrade: upgrade_TO1072.bin: (short pause) "There is no upgrade package!" upgrade_TO1074.bin: (short pause) "There is no upgrade package!" upgrade_TO1102.bin: (short pause) "There is no upgrade package!" upgrade_TO1104.bin: (short pause) "There is no upgrade package!" upgrade_TO1102M.bin: (short pause) "There is no upgrade package!" upgrade_TO1104M.bin: (long pause) "Version of upgrade package was wrong!" Effects of renaming to "upgrade_TO1104M.bin" and placing on flash drive: upgrade_TO1072.bin: Didn't Try upgrade_TO1074.bin: Didn't Try upgrade_TO1102.bin: Didn't Try upgrade_TO1104.bin: ******** WINNER WINNER CHICKEN DINNER! *********** upgrade_TO1102M.bin: (long pause) "Version of upgrade package was wrong!" upgrade_TO1104M.bin: N/A Post-upgrade: Model: TO1104M Version: 6.11.1.273 --- End code --- After the upgrade it automatically listed WLAN, UART, LIN, SPI, CAN, I2C, and 1553B in the license list and showed the S1 and S2 traces, but activating them does not draw a decode trace, even after several different attempts to capture SPI, RS232, and I2C. Further investigation is necessary. EDIT: if we ignore M and non-M, the versions make more sense (shocking, I know). I have revision 6 hardware while others have revision 7. Does anyone have working decodes on a device with HW version 6? Does anyone have a TO1104 with HW version 6? EDIT 2: SPI and UART data triggers work, even though the decode traces don't show! |
| TK:
--- Quote from: jjoonathan on August 01, 2017, 01:15:01 am ---After the upgrade it automatically listed WLAN, UART, LIN, SPI, CAN, I2C, and 1553B in the license list and showed the S1 and S2 traces, but activating them does not draw a decode trace, even after several different attempts to capture SPI, RS232, and I2C. Further investigation is necessary. --- End quote --- Do you see all the protocols as ACTIVE when you enter the passcode? If you get any error message, then you need to verify if you entered the passcode correctly. If the protocols are not active, you can trigger but do not get the decoded information on screen. |
| jjoonathan:
I never entered a license code, I just upgraded the FW and they appeared, presumably because I have a 1104. Picture of the license screen: https://photos.app.goo.gl/5s9Hkz8IBj88eKBn2 |
| Navigation |
| Message Index |
| Next page |
| Previous page |