Products > Test Equipment
Micsig Tablet Oscilloscope tBook mini TO1104 review (100Mhz 4 channel 'scope)
<< < (9/37) > >>
fishandchips:

--- Quote from: nctnico on June 25, 2017, 12:33:19 pm ---AFAIK you can't hack the MicSig scopes and you can't add 4 channels later. The maximum samplerate for the MicSig mini-tbook (TO1000 series) is 250Ms/s with 4 channels enabled. The GW INstek GDS2000E and MSO2000 have 500Ms/s as maximum samplerate with 4 channels enabled.

--- End quote ---

Thanks. Do you mean the following?

For both the 2-channel and 4-channel versions, if I only turn on one channel, I get 1Gs/s. If I turn on two channels, I get 500Ms/s per channel?
I4E:
Hello Everyone

Just wanted to say thanks for posting all your reviews and videos online. We've been thinking about contacting Micsig to see about adding their scopes to our product line. Your feedback above was very helpful.

Have a great day!

Sincerely,

Joy Torres
Instruments 4 Engineers
info@instruments4engineers.com
www.instruments4engineers.com

Authorized Rigol Distributor.
Authorized Triarcy Technologies distributor
Authorized Maynuo Distributor
Authorized Pico-Tech Distributor
Authorized Micsig UK  Distributor, Micsig Ireland Distributor
______________________________

Revision:  Id UPDATE July 4 2017:

We are now officially authorized Micsig Distributors in the UK and Ireland for all their products.    https://www.instruments4engineers.com/micsig-to1104-100mhz-tablet-oscilloscope-micsig-distributor
nctnico:

--- Quote from: fishandchips on June 25, 2017, 10:29:41 pm ---
--- Quote from: nctnico on June 25, 2017, 12:33:19 pm ---AFAIK you can't hack the MicSig scopes and you can't add 4 channels later. The maximum samplerate for the MicSig mini-tbook (TO1000 series) is 250Ms/s with 4 channels enabled. The GW INstek GDS2000E and MSO2000 have 500Ms/s as maximum samplerate with 4 channels enabled.

--- End quote ---

Thanks. Do you mean the following?

For both the 2-channel and 4-channel versions, if I only turn on one channel, I get 1Gs/s. If I turn on two channels, I get 500Ms/s per channel?

--- End quote ---
Yes.
fishandchips:
From the specs, the TO1104 has bandwidth limit of 20MHz, high pass, low pass while the non-Mini versions do not support high pass and low pass filtering. Does that mean the mini version is better?

Somewhere I read that different manufacturers have different definitions for the max capture rate and memory depth. Am I correct? I am trying to decide among various Micsig models.

For Max capture rate, which would be sufficient and recommended?
80K wfm/s, 250K wfm/s or 500K wfm/s

For memory depth, which would be sufficient and recommended?
18Mpts, 28Mpts or 90Mpts?

Between the two variables, which is more important?
hammy:
Another millennial asking the same questions in several self created threads over and over again.  :palm:
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod