Products > Test Equipment

Modern replacement for 2-channel recorder with high voltage input needed

<< < (4/7) > >>

Martin72:
Can it record the values over at least 8..10 hours Rob ?

tautech:

--- Quote from: Martin72 on August 15, 2023, 09:27:15 pm ---Can it record the values over at least 8..10 hours Rob ?

--- End quote ---
Never tried.  :-[

However you have these and depends on the accuracy you need as with the lower reading rates the memory will take longer to fill.
1 Gb NAND flash size, Mass storage configuration files and data files.

Study the user manual and do some tests yourself.  ;)

Martin72:

--- Quote ---Never tried.
--- End quote ---

I will then tell you if and how it works. ;)

Kim Christensen:
Another option would be to run software like LabView, MyOpenLab, etc, on a PC and connect via USB, serial, LAN, GPIB, etc to the required instruments, DAQ, etc. Then you can have all kinds of fancy graphs, storage, and analysis.

Martin72:
When i just skimmed the manual of the sdm 3045x, this would be the only possibility, because the multimeter can not directly store something continuously.
There would only be the possibility to address it externally and to query and store data via polling.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod