| Products > Test Equipment |
| My poor mans SMU - The Agilent 66311B |
| << < (29/41) > >> |
| SKPang:
Got some binding post but it didn't have a hole for the bare wire so I drilled a hole myself. Didn't want to solder the wires to the PCB so I routed it to the outside. Not as neat but it will do. |
| rrinker:
Are those actual HP binding posts or are they the look-alikes that were posted a few posts back? Now seen on the unit itself, if those are the fakes, they sure seem to have the right look and color to match the rest of the design. |
| SKPang:
They are not real HP ones. They are from Rapid electronics: http://www.rapidonline.com/truconnect-24-827-1-grey-4mm-test-socket-solder-connection-60v-24a-red-17-3270 http://www.rapidonline.com/truconnect-24-827-2-grey-4mm-test-socket-solder-connection-60v-24a-black-17-3271 I like them because the colour matches a bit. |
| FrankE:
Good grief! How many tracking numbers can one package have. It cleared customs at CDG (Paris) on Monday. Tomorrow, maybe. I've got the missing Phoenix terminals. My one is also missing a front panel. I had binding posts in my RS order but I took them out to put in my Digikey order but I'm not quite at £50 threshold for free delivery yet. I hope there's not too much wrong with it electronically or if there is, it's something I can handle. |
| TheSteve:
I like the look of the binding posts as well, very much a factory look to them. |
| Navigation |
| Message Index |
| Next page |
| Previous page |