Products > Test Equipment
My poor mans SMU - The Agilent 66311B
<< < (18/41) > >>
SKPang:
Got my terminal block today from Farnell / element 14.

5way 5.08mm Phoenix contact. Order code : 3705389 £2.69 + VAT
4way 5.08mm Phoenix contact. Order code : 3705377 £2.18 + VAT

There are some cheaper make but I like to stick with Phoenix.

mtdoc:

--- Quote from: ve7xen on February 26, 2016, 09:42:40 am ---Not sure how painful it is to order, I think there is an automated process in the US, but in Canada it seems I need to call them...

--- End quote ---

To order online in the U.S. requires a valid business email domain and valid matching business address for shipping and billing. I tried once using my work email and home address for billing and they rejected it. Maybe I could have called to make it happen but it wasn't worth the effort. I'm not sure how they benefit from making it so restrictive.
ve7xen:
My unit has arrived. Looks like similar condition to others - missing rear bezel and knob, fairly dirty, and the front window is pretty badly scratched, though doesn't hamper use. There is a toggle switch on the rear marked AC-I CAL that also seems to be physically broken (the toggle just floats around). Shows -50mA with no load so probably needs calibration.
TheSteve:
Sounds like an interesting user added mod that needs to be removed.

I will be doing a Keysight parts order soon if you need a knob ve7xen - however I'm in Langley and with the cost of fuel/tolls it probably wouldn't be worth your time.
ve7xen:

--- Quote from: TheSteve on February 26, 2016, 09:06:04 pm ---Sounds like an interesting user added mod that needs to be removed.
--- End quote ---
It certainly doesn't look user-added, as the label seems to be printed on the same sticker as all the other rear-panel markings (see attached). I can't find any reference to it in the service or user manuals, or the current product info though. The closest thing I found was the inhibit calibration switch (I CAL), but the AC bit is confusing. Most likely this is what it is though, as it says 'hold to cal'. I wonder if this is a discontinued orderable option? My unit is HP marked so it must be fairly old.


--- Quote ---I will be doing a Keysight parts order soon if you need a knob ve7xen - however I'm in Langley and with the cost of fuel/tolls it probably wouldn't be worth your time.

--- End quote ---
I might take you up on that if you don't mind just mailing a couple items to me by post. I'll PM you.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod