Products > Test Equipment
My Riden 6006 USB communication device does not show the direct current value on
(1/1)
-ANP-:
Hello, I am a user of Riden 6006. I powered the device with a 48V 7.3A power supply right out of the box. Despite the correct connections, it does not provide any output, and the screen shows a value of 2 amps without changing when the output is turned on. When I measured with a multimeter at the output, the current and voltage values ​​were correct, but the current value displayed on the screen is incorrect. I calibrated it from the interface program, but my problem was not solved. Can you help me?


Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod