Author Topic: Looking for schematic of Victor 88C multimeter  (Read 783 times)

0 Members and 1 Guest are viewing this topic.

Offline thanibee

  • Newbie
  • Posts: 1
  • Country: in
Looking for schematic of Victor 88C multimeter
« on: December 11, 2020, 05:40:15 am »
There are two issues in my multimeter.
1. My multimeter voltage reading are not accurate.
2. In DC voltage range, without any voltage source connected, the reading keeps on increasing.

Did open up the meter. There are too many pots that are soldered and two under the LCD. Need schematic to understand the same or anyone who have worked on these issues, kindly throw some insight.

Any help appreciated.

Thanks,

Thanibee
 

Offline scopeman

  • Regular Contributor
  • *
  • Posts: 198
Re: Looking for schematic of Victor 88C multimeter
« Reply #1 on: December 27, 2020, 11:28:05 pm »
See Attached. The Minipa 2082C is the same meter.

Sam
Scopeman
W3OHM
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf