Products > Test Equipment
Need help hacking DP832 for multicolour option.
Pinkus:
--- Quote ---Couldn't find the info in the DP800 User Manual, it say to contact Rigol.
What is the password and the procedure for DP800 manual calibration, please?
--- End quote ---
I added a link in my post above. See at the first page of the link, there are links to the calibration procedure. The automatic calibration by a python script (if you have a SCPI/LXI ready-DMM available) is using the password "11111"; for the manual calibration "2012" will be the correct one.
Though I tried the manual calibration first and was annoyed quickly about the long and pesky procedure. I then used the python script posted several times here in the forum (e.g. see link above). Instead of manually reading and entering the numbers for two hours I decided to dig into the python stuff (which took longer than 2 hours ... but I learned something new by this, so it was worth it).
_Wim_:
--- Quote from: tossu on April 06, 2019, 02:50:31 pm ---I took a quick look at a DG1032Z firmware I found somewhere. I think it's version 1.06. It has a very similar check for the same magic value at sector 0x78EC.
Could someone eager to hack (or brick) their DG1032Z send these commands to it, preferably via USB, and post the results here? The keyfile.bin I made for DP832 should work.
:PROJ:STAT MCALTIMES,QUERY
*IDN?
:PROJ:STAT MODEL,DG1062Z
*IDN?
--- End quote ---
I can do this, but only next week.
tv84:
I think it's better to not mess with:
:PROJ:STAT MCALTIMES,QUERY
Just do the:
:PROJ:STAT MODEL,DG1062Z
And you'll have a new model!
_Wim_:
--- Quote from: tv84 on April 10, 2019, 05:10:46 pm ---I think it's better to not mess with:
:PROJ:STAT MCALTIMES,QUERY
Just do the:
:PROJ:STAT MODEL,DG1062Z
And you'll have a new model!
--- End quote ---
Thanks. I will give this a try when I am back at home.
stj:
has anybody tried this on the scopes?
on the ds1000z series, it may be usefull in the future to switch it to the MSO variant.
also, although i'm not sure, it was the case that Riglol didnt work on the 2000 and 4000 series.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version