Products > Test Equipment
Need help hacking DP832 for multicolour option.
ted572:
--- Quote from: HDR on July 17, 2019, 10:57:24 am ---Thank you!
I also think that it is absolutly sufficent for my projects. But in germany we say "Haben ist besser als brauchen." (To have is better than to need) ;D
--- End quote ---
Dann schäme dich, denn anscheinend hast du eine der goldenen Regeln deiner Nation gebrochen. Vielleicht sollten Sie umkehren, Ihre Bestellung stornieren und einen RSA3000 / 5000 kaufen. Hi Hi
1anX:
--- Quote from: ted572 on July 17, 2019, 11:34:42 am ---
--- Quote from: HDR on July 17, 2019, 10:57:24 am ---Thank you!
I also think that it is absolutly sufficent for my projects. But in germany we say "Haben ist besser als brauchen." (To have is better than to need) ;D
--- End quote ---
Dann schäme dich, denn anscheinend hast du eine der goldenen Regeln deiner Nation gebrochen. Vielleicht sollten Sie umkehren, Ihre Bestellung stornieren und einen RSA3000 / 5000 kaufen. Hi Hi
--- End quote ---
I wondered what was said so did the translate to english thing.
"Then be ashamed, because apparently you have broken one of the golden rules of your nation. Maybe you should reverse, cancel your order and buy a RSA3000 / 5000. Hi Hi"
Vaiti:
Quick Guide
Flash the rigol-key.img from the attached zipfile to a USB drive using your prefered disk imaging software. (dd/Win32 Disk Imager)
Power on the device, and insert the thumbdrive
Send the SCPI command to change the model number:
--For the DP800 series--
--- Code: ---:PROJ:SET MODEL,DP832A
--- End code ---
--For the DG1000Z series--
--- Code: ---:PROJ:STAT MODEL,DG1062Z
--- End code ---
You can then unlock the Arb16Mb option with this command as well, it will show as trail, but will never expire. (This sets your serial number to DG1ZA000000000, you can revert this by replacing the string with the serial found on the back of your unit, if you have need)
--- Code: ---:PROJ:STAT SN,DG1ZA000000000
--- End code ---
--For the DL3000 series--
--- Code: ---:PROJ:SET MODEL,DL3021A
--- End code ---
Reboot the device and you should be done.
Rigol's Ultra Sigma and the IVI drivers it provides have always been very flaky for me, so I used Messinstrumente with Zadig USB drivers
http://peter.dreisiebner.at/messinstrumente/Messinstrumente_2019-06-14.zip
https://zadig.akeo.ie/downloads/
I wanted to make a quick recap as this thread has gotten pretty long and it actually took me awhile to sort out some of the details and find the original posts that had the relevant information.
I also had trouble with Rigol's Ultra Sigma when trying to issue the SCPI commands, and ted572 (Thank you!) had made a suggestion to use Messinstrumente, and that worked immediately with no issue after installing the Zadig USB driver for the device.
I'm including the rigol-key.zip with this post for ease of download, but credit must go to tossu
https://www.eevblog.com/forum/testgear/need-help-hacking-dp832-for-multicolour-option/msg2475702/#msg2475702
A huge thank you to volkimel, tv84, tossu for making this hack happen.
maxpayne:
This didnt work for me !
I am getting message "Remote command is incorrect"
Am I doing anything wrong ?
tossu:
--- Quote from: maxpayne on August 01, 2019, 05:59:23 pm ---I am getting message "Remote command is incorrect"
Am I doing anything wrong ?
--- End quote ---
Most probably, your USB drive is not set up properly. Make sure you insert the drive after the PSU has booted. If you prepared the drive using the old method Vaiti described, try using the disk image I made later: https://www.eevblog.com/forum/testgear/need-help-hacking-dp832-for-multicolour-option/msg2475702/#msg2475702
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version