Products > Test Equipment
Need help hacking DP832 for multicolour option.
czecht:
I need to hack my DP831 to unlock it all, if possible. I never done anything like this before, but if someone gives me exact info how to, I'll get it done, I think.
Thanks guys!
Gandalf_Sr:
--- Quote from: czecht on August 28, 2020, 04:53:24 pm ---I need to hack my DP831 to unlock it all, if possible. I never done anything like this before, but if someone gives me exact info how to, I'll get it done, I think.
Thanks guys!
--- End quote ---
My preference would be to use the 'magic' USB drive method. You can then use Windows or Linux (whichever you prefer) to Telnet to the DP831 and convince it that it's a different model.
Read back into the thread - it's only 16 pages long. I say read back as it's better to find a recent example of success than a much older one.
kentarhos:
Hi all and sorry for my English.
I want to upgrade my dp832 to dp832A.
I have to enable lan option to send commands via telnet.
When i insert any option key from riglol i get 'Invalid serial number' message
System info
Digital ver . 00.01.16.00.02
boot version 1.09
analog version 04.02.04.03.02.04 .
Am i doing something wrong?
EDIT ...
OK , I did it using tossu method .
Thank you
ligteltelecom:
--- Quote from: ligteltelecom on November 22, 2020, 02:42:47 pm ---Hi bro
This procedure will work with this version below?
My is DP832 (without A) need put Hight Resolution it.
System info
Digital ver . 00.01.16.00.02
boot version 1.09
analog version 04.02.04.03.02.04 .
--- End quote ---
Did you solve your problem? i have same model with same boot and firmware version.
ligteltelecom:
--- Quote from: techymechy on August 26, 2020, 07:01:28 am ---Very clear explanation belzrebuth! Thank you for teaching!
--- End quote ---
Hi bro
This procedure will work with this version below?
My is DP832 (without A) need put Hight Resolution it.
System info
Digital ver . 00.01.16.00.02
boot version 1.09
analog version 04.02.04.03.02.04
Problem solved with Tossu keyfile.bin and ultra sigma sending Scpi command by usb cable.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version