Products > Test Equipment
Need help hacking DP832 for multicolour option.
joeyjoejoe:
--- Quote from: Trident900fi on May 26, 2019, 09:41:00 am ---To update your Rigol DL3021 to DL3021A, here is the complete procedure, without the need of buying the LAN option...
You need:
-Computer with RS232 port
-USB stick formatted in FAT32 with the file keyfile.bin from Tossu (many thanks for the hack !)
-Cross cabel RS232 female-female (2->3; 3->2; 5->5)
-Free software Termite from Compuphase (https://www.compuphase.com/software_termite.htm)
Connect everything together. Start the computer first and launch Termite.
Termite Serial port settings:
-Port COM1 (depend on your computer)
-Baud rate 9600
-Data bits 8
-Stop bits 1
-Parity none
-Flow control none
-Forward none
-Transmitted text Append CR-LF
Turn on the DL3021
To check the connection, you can try to type *IDN? in the Termite command line.
He will return the model of your device.
Type in Termite :PROJ:SET MODEL,DL3021A
That all :D
--- End quote ---
Regarding 3021 to 3031 hack, if we add the missing MOSFET's will it work? Can anyone who's confident in their RIGOL hacking try setting the model to DL3031A to see if it even boots up? (No need to test load yet, but just see if that is enough to make it think it's DL3031A)
I'm willing to try it if there's a way to un-brick things... not confident in my skills :)
ZVI:
Good day! Help! Help! A week ago I received my device. Can't change the model type of my DP832. Installed the program ULTRA SIGMSA connected via USB. I send the command: PROJ: SET MODEL, DP832A. the device displays the message "command entered incorrectly" tried in different versions the answer is always the same. if the device does not give such a message, then the ultra sigma program generates an error. unfortunately my knowledge of programming is too small to win on my own. I will be grateful for any hint and help in solving this problem.
belzrebuth:
Is the USB stick correct?
Which way did you use to make it?
This is most likely the problem since Ultra Sigma seems to recognise the instrument.
ZVI:
I formatted 10 different USB drives and uploaded key file.bin to them. the device sees the USB carrier. ultra sigma sees device on command * IDN? gives back his number.
ZVI:
anyone have any ideas for my problem?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version