Products > Test Equipment

Need help hacking DP832 for multicolour option.

<< < (80/91) > >>

MoriDove:
Hello, I apologize for writing off topic
Tell me is there a way to hack the DG4000 series?

RoGeorge:

--- Quote from: MoriDove on February 12, 2021, 11:45:35 pm ---Hello, I apologize for writing off topic
Tell me is there a way to hack the DG4000 series?

--- End quote ---

Yes, there is!  Mine is a DG4202 now, very grateful for that, thank you again tv84.   :D
https://www.eevblog.com/forum/testgear/dg4000-a-firmware-investigation/msg2829452/#msg2829452

MoriDove:

--- Quote from: RoGeorge on February 13, 2021, 12:09:59 am ---
--- Quote from: MoriDove on February 12, 2021, 11:45:35 pm ---Hello, I apologize for writing off topic
Tell me is there a way to hack the DG4000 series?

--- End quote ---

Yes, there is!  Mine is a DG4202 now, very grateful for that, thank you again tv84.   :D
https://www.eevblog.com/forum/testgear/dg4000-a-firmware-investigation/msg2829452/#msg2829452

--- End quote ---
thank!

mike_drz:
Thanks everybody!  Was able to unlock my DG1022 to DG1062, special thanks to tossu and Gandalf_Sr, your posts were very help in the process.  I had a hell of a time establishing a telnet connection, I had to directly connect my sig gen to my gateway for it to work.  Now I'm viewing my beautiful 60 MHz sin wave on my unlocked Rigol scope.  lol

thushku:

--- Quote from: Trident900fi on May 26, 2019, 09:41:00 am ---To update your Rigol DL3021 to DL3021A, here is the complete procedure, without the need of buying the LAN option...
You need:
-Computer with RS232 port
-USB stick formatted in FAT32 with the file keyfile.bin from Tossu (many thanks for the hack !)
-Cross cabel RS232 female-female (2->3; 3->2; 5->5)
-Free software Termite from Compuphase (https://www.compuphase.com/software_termite.htm)

Connect everything together. Start the computer first and launch Termite.
Termite Serial port settings:
-Port COM1 (depend on your computer)
-Baud rate 9600
-Data bits 8
-Stop bits 1
-Parity none
-Flow control none
-Forward none
-Transmitted text Append CR-LF

Turn on the DL3021
To check the connection, you can try to type *IDN? in the Termite command line.
He will return the model of your device.
Type in Termite :PROJ:SET MODEL,DL3021A
That all  :D

--- End quote ---

Important : For RS232 Communication with PC and DL3021 you can use RS232 Cross cable (2->3; 3->2; 5->5) as mentioned above .
But in case of DP832 you have to use Straight Connection (2->2;3->3;5->5) .

Not sure why Rigol decided to use two types of RS232 Cables ...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod