Author Topic: Need help with Feeltech signal generator FY2300h software  (Read 1324 times)

0 Members and 1 Guest are viewing this topic.

Offline exocetTopic starter

  • Newbie
  • Posts: 3
  • Country: gr
Need help with Feeltech signal generator FY2300h software
« on: March 28, 2018, 08:53:21 pm »
This is my first post here. I recently bought an FY2300h 50Mhz signal generator from banggood.It came with a CD with software and manuals for various Feeltech models but for FY2300H there is only a 'exe' file which in my case seems to be corrupted.(when I run it I'm getting an error message ''unable to open archive'')
Also there is no driver or txt file showing the necessary steps for installation.Software is very importand to me since I want it to make my own waveforms.I would be gratefull if someone can point to a download link for my model (FY2350H V3.1).
 

Offline exocetTopic starter

  • Newbie
  • Posts: 3
  • Country: gr
Re: Need help with Feeltech signal generator FY2300h software
« Reply #1 on: March 29, 2018, 05:29:46 pm »
Am I the only who owns this signal generator?
 

Offline rajivdeo

  • Newbie
  • Posts: 2
  • Country: in
Re: Need help with Feeltech signal generator FY2300h software
« Reply #2 on: April 21, 2018, 05:39:51 am »
I own FY2300H.
You may download the manual and software v4.6 from http://en.feeltech.net/html/download/show_50.html

 
The following users thanked this post: boggis the cat


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf