Products > Test Equipment

Need Tektronix TDS220 firmware file

<< < (8/8)

ximtou:
Bonjour.

Le plus récent de mes osciloscope, c'est un tds220 .
J'ai aussi un tds3034
Mon problème c'est que j'ai besoin de FFT et il n'y à pas grand chose de plus sur les appareils comme rigol neufs qui justifie un achat. Mon TDS 3034 vois les oscillateurs de télécommande de porte de garage, pas très net, mais mesurable ! Et ce n'est qu'un 4x300mhz. Les émetteur FM, c'est un jeux d'enfant.

Bien sûr mon TDS 220 n'est pas à jour.
Donc j'ai trouvé ces circuits intégrés , voir les images , sont ils bon ?

https://ibb.co/Xt9Z0x5
https://ibb.co/dD7wxvf

Et modifier pin 31 sur 1 et 1 sur 5 v?

Autre chose , pourquoi ne montez vous pas des led à la place du tube sur vos écrans en panne ?
Merci

TERRA Operative:
You can see the FFT upgrade process in this video. You will need the optional TDS2CM module to do it, but if you can get a TDS2MM module cheaply then you won't need to do the upgrade at all.

If you want to upgrade the firmware in the scope, that can be done easily too with the older version scope, but the newer version uses a flash chip instead of a PROM chip and I haven't worked out how to update the flash chip type. I believe it involves using a specially made module that plugs into the option port.
If you have the older version scope, the old PROM chip can be simply unplugged and discarded, and a new PROM chip programmed and plugged straight in.


https://youtu.be/MKwDZn6nyXo

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod