Products > Test Equipment
Need Tektronix TDS220 firmware file
mmaseda:
I need a bin or hex firmware file for a TDS220. Would like V1.17 or later for programming a 27C040 EPROMs.
JFJ:
The firmware file in Intel Hex format is too big for this forum (the file is 1.441MB and the limit is 1MB). A binary version of the file is only 512KB, but .bin files are not accepted by the forum. So, I changed the binary file's extension to .txt before uploading it. Please change it back to .bin when you have saved it.
Version 1.19 firmware is Tektronix part number 163-0792-06. The checksum will be 02B9FBC5 or FBC5 (depending on how your programmer displays it).
mmaseda:
Got it !!! Thanks
cardre:
Reviving this old post, wondering if you have or know what the latest firmware is for the accompanying TDS2CM communication model for the TDS210 and TDS220? The unit I'm borrowing from a friend has CMV:v1.02 and if I can upgrade both for him, would be good. Thanks.
Nprod:
Reviving this post again - does anybody here have TDS220 firmware that's 2.0 and later? I also saw that you can upgrade a TDS2CM module to a TDS2MM one if you swap out the RAM and EPROM and then flash the TDS2MM.hex on it as described here: http://www.edaboard.com/thread8031.html
Sadly that thread is ancient and they only gave out the .hex file for it via PM... If anybody has these it would be greatly appreciated.
Navigation
[0] Message Index
[#] Next page
Go to full version