Products > Test Equipment

New bench scope - Fnirsi 1014D, 7", 1GSa/s

<< < (10/67) > >>

pcprogrammer:
Was wondering if the 1014D has the same issue as the 1013D with the images from the SD card. It does. See the attached images. Not sure if it is my linux mint or the actual images but my guess is the latter.

And bugs, of course not :-DD

When connected via USB with an image from the SD card open on the computer all one has to do is press the menu button and the change is very big you get what you see in the second and third image.

Have not tried to load the new firmware dmitrkov pointed to.

dmitrkov:
Yes, the firmware has a lot of bugs.  :--  I wrote about some mistakes to the seller and after a long  :palm: time they fixed them. It may be worth writing about this error to the seller.

P.S. on the official support site, the firmware for this oscilloscope was completely removed ... :-//

pcprogrammer:

--- Quote from: dmitrkov on August 23, 2021, 04:05:47 pm ---P.S. on the official support site, the firmware for this oscilloscope was completely removed ... :-//

--- End quote ---

I noticed that too. Wanted to download them today, but nothing there |O

For the 1013D I found out that it can be updated with the same procedure. It needs one of these files on the SD card: "UTX-1013.bin", "FSI-1013.bin", "DAN-1013.bin" or "YPK-1013.bin".
These names are in the function I wrote about in the 1013 thread, were at the end of the function, if anything goes wrong it zero's the first 1000 bytes of the program location in the flash. As it makes use of the SD card code it will become clearer once I reversed that.

dmitrkov:

--- Quote from: pcprogrammer on August 23, 2021, 04:30:55 pm ---For the 1013D I found out that it can be updated with the same procedure. It needs one of these files on the SD card: "UTX-1013.bin", "FSI-1013.bin", "DAN-1013.bin" or "YPK-1013.bin".

--- End quote ---
I also thought to try with the file name "FSI-1013.bin", but there was not enough time. You have confirmed my assumptions.

Here are collected all the firmware that I have at the moment, for 1014D https://1drv.ms/u/s!Av-Riptwsak2ivB9XUOHBWbRCGIOzA?e=VU2MfD
I hope FNIRSI will not mind, since these firmware were already freely available

thirteeneast:
Too summarize, for anyone reading this "ITS GARBAGE, I WOULD BUY IT WITH YOUR MONEY!!!"

KEEP CLEAR OF IT.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod