Author Topic: RuiDeng Riden RD6006 DC power supply  (Read 155141 times)

0 Members and 3 Guests are viewing this topic.

Offline HHitech

  • Newbie
  • Posts: 1
  • Country: fi
Re: RuiDeng Riden RD6006 DC power supply
« Reply #800 on: August 18, 2021, 12:21:44 pm »
Hi,

Press and hold "ENTER" and power on RD6006 or RD6006P to enter Boot Mode, then start firmware upgrade.
That will solve your problem when you change between official and custom firmware.
 
The following users thanked this post: duckduck

Offline sofakng

  • Contributor
  • Posts: 47
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #801 on: August 18, 2021, 01:23:42 pm »
What's the difference between the custom firmware and the official firmware?
 

Offline bateau020

  • Regular Contributor
  • *
  • Posts: 118
  • Country: fr
Re: RuiDeng Riden RD6006 DC power supply
« Reply #802 on: August 18, 2021, 01:33:32 pm »
What's the difference between the custom firmware and the official firmware?

There is no readily available list. There have been a lot of enhancements ....

You can find the doc for the custom firmware here: https://www.eevblog.com/forum/testgear/custom-firmware-reference-document-for-riden-rd60xx-power-supplies/msg3482952/#msg3482952

You can compare that with the documentation of the original firmware that is mentioned a couple of posts above this.
 

Offline sofakng

  • Contributor
  • Posts: 47
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #803 on: August 18, 2021, 01:52:10 pm »
ok - thanks for the information!
 

Offline darkspr1te

  • Contributor
  • Posts: 27
  • Country: zm
Re: RuiDeng Riden RD6006 DC power supply
« Reply #804 on: August 21, 2021, 11:15:00 am »
For those that are interested, I have created a tool to encrypt your own binaries for RD6012/RD6006 and upload to the device.


https://www.eevblog.com/forum/microcontrollers/rd60xx-mcu-controlled-power-units/msg3637483/#msg3637483

Also provide is test environment for Arduino/platformio for Bootloader version (0x8006000) & non bootloader versions (0x8000000)


darkspr1te
 
The following users thanked this post: ledtester, dmitrkov

Offline ShayBox

  • Contributor
  • Posts: 14
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #805 on: August 26, 2021, 12:15:05 am »
Does anyone know of software that can connect to the wireless module besides the official software? do we know the protocol?
 

Offline bateau020

  • Regular Contributor
  • *
  • Posts: 118
  • Country: fr
Re: RuiDeng Riden RD6006 DC power supply
« Reply #806 on: August 26, 2021, 04:07:09 am »
Does anyone know of software that can connect to the wireless module besides the official software? do we know the protocol?
The RD talks modbus. The WiFi module, in the standard configuration, wants an external device (mobile app or PC software) to send the modbus data to. A fair amount of people have worked on this, not all really super user friendly or really stable:

* https://github.com/Baldanos/rd6006
* https://sigrok.org/wiki/Riden_RD6006
* https://github.com/msillano/NiMH_charger_logger

..and others.

But since it is a simple ESP8266 module (ESP12F), you can reprogram it. When you do that, you can turn the connection around for example (let any device connect to the RD instead of designating 1 device the RD talks to), or do more fancy stuff by letting the ESP translate protocols.
Some examples of reprogramming the ESP:
* https://community.home-assistant.io/t/riden-rd6006-dc-power-supply-ha-support-wifi/163849
* https://cuttlefishblacknet.wordpress.com/2020/03/01/riden-rd6006-wifi/

Most if not all options are modbus protocol based.
 

Offline ShayBox

  • Contributor
  • Posts: 14
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #807 on: September 03, 2021, 11:53:03 pm »
So, I blew the top fuse, and when I replace it, it blows again, and if I short it it won't turn on and the T1 with a heatsink next to the fuse heats up fast, but without a fuse it turns on just no power output...
 

Offline Skyfox

  • Contributor
  • Posts: 44
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #808 on: September 06, 2021, 01:36:31 am »
Unless my eyes glazed over and I scrolled right past it, has anyone figured out how to successfully make this power supply connect to the PC software over Wifi?  I have the current versions of the software (which is glitchy and likes to freeze, so I prefer the older versions) and the latest firmware, and while I can connect to it over USB, I can't figure out how to make it connect over wifi.
 

Offline bateau020

  • Regular Contributor
  • *
  • Posts: 118
  • Country: fr
Re: RuiDeng Riden RD6006 DC power supply
« Reply #809 on: September 06, 2021, 04:28:27 am »
Unless my eyes glazed over and I scrolled right past it, has anyone figured out how to successfully make this power supply connect to the PC software over Wifi?  I have the current versions of the software (which is glitchy and likes to freeze, so I prefer the older versions) and the latest firmware, and while I can connect to it over USB, I can't figure out how to make it connect over wifi.

If you have the custom software, you can use the steps described in the documentation of the custom software (https://www.eevblog.com/forum/testgear/custom-firmware-reference-document-for-riden-rd60xx-power-supplies/msg3482952/#msg3482952), chapter 19.1 with a mobile phone and the mobile app first, and then chapter 19.3 to point the RD to the PC.

If you do not have the custom software, it can become a LOT more complicated: https://www.eevblog.com/forum/testgear/ruideng-riden-rd6006-dc-power-supply/msg3416076/#msg3416076

 

Offline ShayBox

  • Contributor
  • Posts: 14
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #810 on: September 06, 2021, 08:05:15 am »
Ok I talked to support, they said the mosfets need replaced, but I have no knowledge in this, I can solder

Should I buy some "HY3210 P" off aliexpress?
 

Offline bateau020

  • Regular Contributor
  • *
  • Posts: 118
  • Country: fr
Re: RuiDeng Riden RD6006 DC power supply
« Reply #811 on: September 06, 2021, 08:29:42 am »
A quick search did not come up with direct equivalents. Maybe others have some recommendations.
The datasheet is here: https://datasheet.lcsc.com/szlcsc/HY3210P_C110583.pdf. It is a bit suspect that they haven't published thermal resistance for the different packages, but it looks that you may also get lucky with the HY3210 M, PS or PM versions, although I'd recommend the P version, just in case. With all of these packages, you'll need to bend the legs. Don't get the B version.
 

Online HKJ

  • Super Contributor
  • ***
  • Posts: 2012
  • Country: dk
    • Tests
Re: RuiDeng Riden RD6006 DC power supply
« Reply #812 on: September 06, 2021, 08:41:33 am »
Should I buy some "HY3210 P" off aliexpress?

Many mosfet on Aliexpress are fakes, i.e. a generic type, but with the requested type number on it. This may be fine for non-critical applications, but I doubt it will work for long on this power supply.
 

Offline ShayBox

  • Contributor
  • Posts: 14
  • Country: us
Re: RuiDeng Riden RD6006 DC power supply
« Reply #813 on: September 06, 2021, 09:26:02 pm »
Someone pointed out that LCSC, the same website that serves the datasheet sells the same chips, so I bought them from them
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf