| Products > Test Equipment |
| New handheld 2ch DSO, Mustool MDS120MC2, claimed 120MHz/500MSps (June 2024) |
| (1/1) |
| tunk:
Most of this info is from learnelectronics video below: - 120MHz single channel - 40MHz dual channel - equivalent max sampling rate 500MSps - looks like it uses MCX connectors - storage depth 12.8div (?) - vertical sensitivity 50mV-100V - time base 6nS-50S - trigger auto/normal/single, rising/falling edge - signal generator: sine/triangle 100kHz, square 3MHz, 0-3V - 320×240 2.4" display - 124×80×35mm, 187g At Banggood for around US$80: https://www.banggood.com/MUSTOOL-2IN1-120MHZ-Dual-Channel-40MHZ+2-500MS-or-s-Handheld-Digital-Oscilloscope-+-Function-Signal-Generator-MDS120MC2-p-2011184.html?cur_warehouse=CN A short review by learnelectronics, he wasn't very impressed and thought it was a bit too expensive: https://youtu.be/JNNQ12k7EK8 |
| tautech:
--- Quote from: tunk on June 11, 2024, 04:03:11 pm ---Most of this info is from learnelectronics video below: - 120MHz single channel - 40MHz dual channel - equivalent max sampling rate 500MSps - looks like it uses MCX connectors - storage depth 12.8div (?) - vertical sensitivity 50mV-100V - time base 6nS-50S - trigger auto/normal/single, rising/falling edge - signal generator: sine/triangle 100kHz, square 3MHz, 0-3V - 320×240 2.4" display - 124×80×35mm, 187g At Banggood for around US$80: https://www.banggood.com/MUSTOOL-2IN1-120MHZ-Dual-Channel-40MHZ+2-500MS-or-s-Handheld-Digital-Oscilloscope-+-Function-Signal-Generator-MDS120MC2-p-2011184.html?cur_warehouse=CN A short review by learnelectronics, he wasn't very impressed and thought it was a bit too expensive: https://youtu.be/JNNQ12k7EK8 --- End quote --- :-- Good luck even resolving 10mV of ripple on a power rail with such poor max sensitivity. :-// |
| tunk:
Also sold as the TOOLTOP ET120MC2, from around US$60: https://www.aliexpress.com/item/1005007156636269.html |
| Navigation |
| Message Index |