Products > Test Equipment
New Hantek DSO2X1X models?
eurotips:
--- Quote from: nycn on December 10, 2023, 09:04:12 am ---Received my new new DSO2C10. Added some components from brocken premium psu:
x and y capacitors right on power socket, ferrites - the ring near switch button and clip-on ferrite on +-7v flat cable. Also added copper shield to the transformer.
2mv high frequency noise level was redused in about 2 times.
--- End quote ---
How high is the current consumption in +5/+7/-7V lines in the new version of the power supply?
IW2evk Roberto:
Hi all,
i've a question for the forum ..
I running on my pc linux ubuntu 20.04 lts
Exist software linux for Hantek DS02xx oscilloscope?
I've found OpenHantek, but seem not corrtect for this series.
Thanks
Roberto iw2evk
Aldo22:
Have you tried it?
It says "Supported devices: DSO2xxx Series".
https://github.com/OpenHantek/openhantek
There is Keysight IO Libraries Suite for Linux, which seems to be the basis for the Hantek applications.
Not sure how useful.
https://www.keysight.com/zz/en/lib/software-detail/computer-software/io-libraries-suite-downloads-2175637.html
IW2evk Roberto:
Mhh..
i try it in the christmas holidays..
Thanks
Roberto
Aldo22:
Just tried this on my RPi4: https://github.com/phmarek/hantek-dso2000
I was able to control the DSO2000 on the shell and read out values.
It's a start. In any case, you don't have to install the Keysight monster this way.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version