Products > Test Equipment
New Hantek DSO2X1X models?
<< < (346/388) > >>
IW2evk Roberto:
Hi,

seem intersting..
it's a executable pyton file ?
I suppose : connect dso2... to pc (for me  linux ubuntu 20.04)
goes to shell
With Super user start file .PY with command required
then recover on pc the file and use in conjunction with spreadsheth (e.g. opencalc) tor use data collected.

Right ?

Roberto

P.s. if you speack italian or french contact me on PM

Thanks
Aldo22:
With PyVISA I was able to address the Hantek DSO2000 immediately.
First I tried Ni-Visa, but it did not see my Hantek using the "VISA Interactive Control". However, I didn't try it for long.

With the "phmarek / hantek-dso2000" script (which is using PyVISA) you can download the waveform data in different formats. Apparently also for viewing in "gnuplot".

But I am more interested in controlling the scope, e.g. that I don't get a cramp when I want to adjust the signal generator from 10Hz to 10MHz by turning the "Multifunctional Knob".
You can control the device with PyVISA using any of the SCPI commands.

I have converted the SCPI command list from the "DSO2000 SCPI Programmers Manual" PDF into a machine-readable form (JSON), so that you can use it as a basis for an interface.
(-> Attachment. First version, may contain errors).

Btw. you don't need to be "super user", it should be enough to add "99-hantek-dso.rules" to "/etc/udev
/rules.d/".
https://github.com/phmarek/hantek-dso2000/tree/main/etc/udev/rules.d

IW2evk Roberto:
i've installed on linux lubuntu 20.04 via flatpack.
But in 99-hantek-dso.rules seem not appaers my version
Aldo22:

--- Quote from: IW2evk Roberto on December 21, 2023, 01:01:48 pm ---i've installed on linux lubuntu 20.04 via flatpack.
But in 99-hantek-dso.rules seem not appaers my version

--- End quote ---
I have absolutely no idea what you're talking about.
carlonb:
Hi everyone, I'm new to the forum and I'm waiting for the Hantek DSO2C10 oscilloscope to be delivered to me.
In the meantime I would like to familiarize myself with the tools made available by DavidAlfa (Thanks David).
In particular I would like to start with the "DSO_Builder" utility to extract the scripts to see how they are made.
I would like to point out that I have read the "readme.txt" file but unfortunately it is intended for those who already know cygwin...
Since I use Windows 10 I therefore installed cygwin(64bit) and added the path to cygwin/bin in "environment variables"
to be able to use the Windows dos-prompt.
I tried copying the "dso3kb_backup_builder.upk" file into a folder and launching Run ./extract.sh "dso3kb_MyPackage.upk"
but nothing happens and I get no error messages, but I also can't find the extracted package.
At this point it is not clear to me how to proceed to decrypt and extract the "dso3kb_backup_builder.upk" file.
Could you help me from this point?

Thank you.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod