Products > Test Equipment
New Hantek DSO2X1X models?
<< < (369/388) > >>
artmau:
The NAND is GD5F1GQ5UEYIG. Email sent. TY!
vistorik:

--- Quote from: artmau on March 20, 2024, 12:38:33 pm ---The NAND is GD5F1GQ5UEYIG. Email sent. TY!

--- End quote ---
artmau, I could try to solve your problem if you'll send me the backup.bin file that you've got with the dsoflash.
artmau:
Here is the link to the file: https://filetransfer.io/data-package/to1hUCnm#link

I've tried comparing my dump file with the "default(original).bin" from dso2c10 (dated May 25 2021?) on my own but there are a lot of large and small differences... I cannot tell specific reason for the lockup. I do not want to copy/paste fragments randomly. Maybe restoring whole original dump with dsoflash is an idea?
vistorik:

--- Quote from: artmau on March 20, 2024, 04:28:05 pm ---Here is the link to the file: https://filetransfer.io/data-package/to1hUCnm#link

I've tried comparing my dump file with the "default(original).bin" from dso2c10 (dated May 25 2021?) on my own but there are a lot of large and small differences... I cannot tell specific reason for the lockup. I do not want to copy/paste fragments randomly. Maybe restoring whole original dump with dsoflash is an idea?

--- End quote ---
The dump obtained on a W25N01GVZEIG chip will not work on a GD5F1GQ5UEYIG chip. So you need a new platform-tools that works with the GD5F1GQ5UEYIG. After using platform-tools you need to restore the system.inf and the dds_calbration.dat files. These files could be obtained from your dump. I've downloaded the backup.bin file and suppose to test this file with my device with a GD5F1GQ5UEYIG chip connected to the device.
vistorik:

--- Quote from: artmau on March 20, 2024, 04:28:05 pm ---Here is the link to the file: https://filetransfer.io/data-package/to1hUCnm#link

--- End quote ---
artmau, I flashed your dump to my GD5F1GQ5UEYIG chip using dsoflash v.36. The device started normally, nothing freezes, everything works. But your device information is not in the dump. Your dump looks like after using a platform-tools. The system.inf file is not difficult to make if you know the serial number of your device. I extracted the information for the calibration file from your dump and can make a upk-file to restore the system.inf file (need the serial number of your device) and calibration file - this is not a problem. Have you tried turning on the device after using platform-tools?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod