| Products > Test Equipment |
| New Hantek DSO2X1X models? |
| << < (377/388) > >> |
| coastline8888:
My DSO2C10 arrived a few days ago. Software: 1.0.3.0.0(230831.00) Firmware:3205 I've read the FAQ and understood most of it - I think! So far I have: * created a Flash Backup using DSOFLASH * confirmed I have GD5F1GQ5UEYIG memory * created a Backup Builder Backup * succesfully completed the 2D15 conversion mod - Model updated to 2D15, Wave generator is functioning >:DSo far so good and a big :-+ for all the work that has gone into providing this fantastic resource. Now I am a little unsure about updating Firmware and Software so I have a few questions: * Can/Should I update to latest Firmware 3209_B209 * Can/Should I update to latest System Update 2024.03.26 * If yes should I update in that order - Firmware then Software * What is the FPGA FW (2024.03.26_fpga_3209), do I need to update this separately * With GD5F1GQ5UEYIG memory is there increased risk - bearing in mind the two backups I have taken I'm sure these are dumb questions looking from 18 months and 76 pages of trial and error context but just from the FAQ I'm not sure I understand the update variations entirely. Thanks for indulging my noobness! ......waits by the door coat in hand just in case :-[ :palm: |
| Pin240:
--- Quote from: DavidAlfa on May 01, 2024, 11:26:03 pm ---Thanks, added to the FAQ. Also made a package updating only the software (Skipping FW3209) so it doesn't break FW31xx models. --- End quote --- Updated without problems |
| vistorik:
--- Quote from: coastline8888 on May 03, 2024, 04:21:18 pm ---My DSO2C10 arrived a few days ago. * Can/Should I update to latest Firmware 3209_B209 * Can/Should I update to latest System Update 2024.03.26 * If yes should I update in that order - Firmware then Software * What is the FPGA FW (2024.03.26_fpga_3209), do I need to update this separately * With GD5F1GQ5UEYIG memory is there increased risk - bearing in mind the two backups I have taken --- End quote --- * You can but not should update to latest Firmware 3209_B209 * You can but not should update to latest System Update 2024.03.26 * No * This upk-file updates SW to 2024.03.26 and FW to 3209, you could but not should update SW and FW together * Having the Flash Backup - no risk even if your device becomes bricked, in this case the Backup Builder Backup will not help at all - only the Flash Backup will help |
| coastline8888:
--- Quote from: vistorik on May 04, 2024, 03:18:52 am --- --- Quote from: coastline8888 on May 03, 2024, 04:21:18 pm ---My DSO2C10 arrived a few days ago. * Can/Should I update to latest Firmware 3209_B209 * Can/Should I update to latest System Update 2024.03.26 * If yes should I update in that order - Firmware then Software * What is the FPGA FW (2024.03.26_fpga_3209), do I need to update this separately * With GD5F1GQ5UEYIG memory is there increased risk - bearing in mind the two backups I have taken --- End quote --- * You can but not should update to latest Firmware 3209_B209 * You can but not should update to latest System Update 2024.03.26 * No * This upk-file updates SW to 2024.03.26 and FW to 3209, you could but not should update SW and FW together * Having the Flash Backup - no risk even if your device becomes bricked, in this case the Backup Builder Backup will not help at all - only the Flash Backup will help --- End quote --- Thanks for your help - I will not update anything else. |
| DavidAlfa:
Why not? As far as I know all 32xx firmwares should work in scopes that originally came with some 32xx version, which are all since 2021 or so. Same with software, I would try, shouldn't cause any issues, whether it has one flash type or another it doesn't matter, that's managed by the kernel, which the software updates never touch. As long as you made your backups, there's nothing to worry about! |
| Navigation |
| Message Index |
| Next page |
| Previous page |