Author Topic: New Hantek DSO2X1X models?  (Read 472929 times)

0 Members and 5 Guests are viewing this topic.

Offline BillyO

  • Super Contributor
  • ***
  • Posts: 1668
  • Country: ca
Re: New Hantek DSO2X1X models?
« Reply #1925 on: August 19, 2024, 05:13:14 pm »
The other poster apparently did own it, had trouble with it and is warning others about his bad experience.  What's wrong with that?  Is that not what forums like this are for .. sharing our experiences?

What's wrong with it?
It's not your experience if you don't own a DSO2000.

Why don't you talk about the devices you have experience with?

I don't go to the Rigol thread and complain about something I "know" by hearsay.
Why do people do something like that?
Dude, you better go give yourself a shake.  I'm not complaining about your silly little scope.  I was just supporting the other guy's right to share his opinion.  He did have the scope so his experience is pertinent.

Bill  (Currently a Siglent fanboy)
--------------------------------------------------
 

Offline Aldo22

  • Super Contributor
  • ***
  • Posts: 1000
  • Country: ch
Re: New Hantek DSO2X1X models?
« Reply #1926 on: August 19, 2024, 05:33:57 pm »
I'm not complaining about your silly little scope. 
Yes, this is that "silly little scope's" thread.
Why are you wasting your time here?
This doesn't make any sense to me.
 

Offline BillyO

  • Super Contributor
  • ***
  • Posts: 1668
  • Country: ca
Re: New Hantek DSO2X1X models?
« Reply #1927 on: August 19, 2024, 05:38:19 pm »
Yes, this is that "silly little scope's" thread.
Why are you wasting your time here?
This doesn't make any sense to me.
I'll spend my time wherever I like and I honestly don't give a gnat's arse what makes sense to you.  :palm:

Okay angry man, I'll give you the last word.
Bill  (Currently a Siglent fanboy)
--------------------------------------------------
 

Offline Aldo22

  • Super Contributor
  • ***
  • Posts: 1000
  • Country: ch
Re: New Hantek DSO2X1X models?
« Reply #1928 on: August 19, 2024, 05:55:30 pm »
I'll give you the last word.

Thank you for the last word. I really appreciate it.  :D
 

Offline vistorik

  • Regular Contributor
  • *
  • Posts: 107
  • Country: de
Re: New Hantek DSO2X1X models?
« Reply #1929 on: August 20, 2024, 08:14:56 pm »
David. On the 4pda forum https://4pda.to/forum/dl/post/31349425/Hantek2XXX_V17_3209.rar there is a new version of platform-tools Hantek2XXX_V17_3209.rar for the GD5F1GQ5UEYIG memory chip and the second version of the board DSO2D15_V1.7 2021.1.14. After running this platform-tools: SW 20240326, FW 3209. This version can also be used for devices with the W25N01GVZEIG memory chip on the second version of the board. After running this version of platform-tools, regardless of the memory chip, the model number in the information window will be either undefined if the PT24C02 does not have a model number specified, or the model number - the one that is present in the PT24C02. After running this version of platform-tools, the front USB-port will be blocked and the rear USB-port icon will appear. This known problem, which is known to be caused by the presence of an empty /dso/app/Square_cusp.tmp file, is resolved by deleting this file by running dso3kb_usb_fix.upk.
« Last Edit: August 20, 2024, 08:17:44 pm by vistorik »
 
The following users thanked this post: morgan_flint, Aldo22

Offline DavidAlfa

  • Super Contributor
  • ***
  • Posts: 6225
  • Country: es
Re: New Hantek DSO2X1X models?
« Reply #1930 on: August 20, 2024, 09:42:19 pm »
Great, thanks!  :)

Updated my platform-tools pack adding this version, it also tries to detech the flash automatically:

« Last Edit: August 25, 2024, 09:23:53 pm by DavidAlfa »
Hantek DSO2x1x            Drive        FAQ          DON'T BUY HANTEK! (Aka HALF-MADE)
Stm32 Soldering FW      Forum      Github      Donate
 
The following users thanked this post: eevbstedt, morgan_flint, Aldo22

Offline vistorik

  • Regular Contributor
  • *
  • Posts: 107
  • Country: de
Re: New Hantek DSO2X1X models?
« Reply #1931 on: August 24, 2024, 02:01:53 am »
Great, thanks!  :)
Updated my platform-tools pack adding this version:
David. What about FAQ:
"If DSOFlash identifies the flash as  GD5F1GQ5UEYIG, the current available platform-tools are not compatible"
 

Offline DavidAlfa

  • Super Contributor
  • ***
  • Posts: 6225
  • Country: es
Re: New Hantek DSO2X1X models?
« Reply #1932 on: August 25, 2024, 09:26:00 pm »
Yeah, fixed  :). Plus, it will now detect the flash automatically using dsoflash.
Hantek DSO2x1x            Drive        FAQ          DON'T BUY HANTEK! (Aka HALF-MADE)
Stm32 Soldering FW      Forum      Github      Donate
 
The following users thanked this post: Aldo22

Offline vistorik

  • Regular Contributor
  • *
  • Posts: 107
  • Country: de
Re: New Hantek DSO2X1X models?
« Reply #1933 on: August 26, 2024, 10:40:50 pm »
Yeah, fixed  :).
Fixed?
Platform-tools versions:
ยป  Unified platform-tools package
    - 2020.12.21, FW3000
    - 2021.01.29, FW3101
    - 2021.05.17, FW3102
    - 2021.07.26, FW3202
    - 2022.07.07, FW3205
 

Offline DavidAlfa

  • Super Contributor
  • ***
  • Posts: 6225
  • Country: es
Re: New Hantek DSO2X1X models?
« Reply #1934 on: August 26, 2024, 11:40:30 pm »
Fixed! (2)  :)
Remember I don't work for Hantek and my time is limited!
Hantek DSO2x1x            Drive        FAQ          DON'T BUY HANTEK! (Aka HALF-MADE)
Stm32 Soldering FW      Forum      Github      Donate
 
The following users thanked this post: Aldo22

Offline vistorik

  • Regular Contributor
  • *
  • Posts: 107
  • Country: de
Re: New Hantek DSO2X1X models?
« Reply #1935 on: August 27, 2024, 07:07:41 pm »
Is this hantek-wave-viewer https://github.com/mattdavis90/hantek-wave-viewer interesant?
 

Offline DavidAlfa

  • Super Contributor
  • ***
  • Posts: 6225
  • Country: es
Re: New Hantek DSO2X1X models?
« Reply #1936 on: August 27, 2024, 09:04:56 pm »
I tried it few years back, very simple, clumsy/lacking interface and being python-based runs very slow.
Try to make a large capture in 4M or 8M depths, then zooming in for the little details... you'll see.

For what it really does, it's better to simply take a screenshot.
« Last Edit: August 27, 2024, 09:08:28 pm by DavidAlfa »
Hantek DSO2x1x            Drive        FAQ          DON'T BUY HANTEK! (Aka HALF-MADE)
Stm32 Soldering FW      Forum      Github      Donate
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf