| Products > Test Equipment |
| New Keysight 4 Channel Scope (1200 X-Series) |
| << < (5/17) > >> |
| 2N3055:
--- Quote from: JPortici on February 13, 2019, 10:30:23 am ---but don't forget that you can't trigger on decode.. and more importantly, on decode errors. If i had to have only one scope and wanted to devoce i would choose one that has the required protocol and can trigger on errors, then memory, then bandwidth. But besides that, ditto everything except the rigol 5000. The more i see of it the more i see them repeating the same old errors again and again. --- End quote --- Agree. Complained to Pico many times about that. But despite that, my pico has huuge memory and in segmented mode you can capture hours of slow traffic and then just filter. But sometimes that is not enough, so I use Keysight for it's trigger to pinpoint errors, and even sometimes to cross trigger... I also don't like some design decisions on new Rigols. But still, at least, on this new platform there is room to grow and we'll see if they fix some problems. I personally like direction in which Siglent is going with these new scopes much better . But if someone would give me Keysight 3000T with 50MS per ch sample memory depth, that would be hard to beat. I think that if new 1000X from Keysight had 10Mpoints per ch (like GW Instek) that would be something fantastic. This way, it is just 2000 without MSO, smaller case and no individual controls per ch. It's an art of giving less not giving more to your customers. |
| TK:
--- Quote from: nctnico on February 13, 2019, 09:09:37 am --- --- Quote from: TK on February 13, 2019, 12:38:49 am --- --- Quote from: nctnico on February 12, 2019, 11:49:35 pm ---Edit: one advantage of the Keysight though is that it can decode across segments and use the list display to jump from one segment to the other. In turn I have not seen any other oscilloscopes do that. --- End quote --- I am not sure the Keysight 1000X series has list display for serial decoding, are you referring to 2000 / 3000 series? --- End quote --- I don't know about the 1000X series. I'd assume a scope with decoding has a list display... --- End quote --- Not the Keysight 1000X series, and micsig added it in the latest firmware |
| pascal_sweden:
Why did you again look over on the Logic Analyzer? |
| w4tch0:
--- Quote from: Calvin on February 13, 2019, 09:29:07 am ---Hi, --- Quote ---It's nice, that you can offer a 4 channel scope with so many features for such little money. --- End quote --- Is that really ´such little money´? A similar equipped Keysight with 200MHz and bus decoders -still with not as many features and functionality as the Siglent SDS1204X-E- costs >2k€ ... almost 3 times as much. From the pictures it is a GWInstek OEM ... hence also of chinese origin. Honest question ... in what regard is the Keysight better or offers more to close the financial gap? regards Calvin --- End quote --- I came to the same conclusion. In the market for a 4 channel 100MHz scope with I2C/SPI decoding and looking at local retailers pricing the Keysight came in literary 3 times the price. Waiting for some reviews and teardowns to see what might justify the price premium. I hope they at least improved the internal build quality. The 2 channel 1000x series was major disappointment in this regard. |
| TK:
--- Quote from: w4tch0 on February 13, 2019, 01:00:28 pm ---I hope they at least improved the internal build quality. The 2 channel 1000x series was major disappointment in this regard. --- End quote --- Can you list the issues you had with the 1000X build quality? |
| Navigation |
| Message Index |
| Next page |
| Previous page |