Products > Test Equipment

New Rigol DS1054Z oscilloscope

<< < (922/966) > >>

Adrian_Arg.:
It did not work for me for the boot version 0.0.1.4, well this version is not that serious either  ::), can I solve the problem of the capture in 24Mbit deep? :popcorn:

Adrian_Arg.:

--- Quote from: RoGeorge on July 15, 2021, 08:30:53 am ---Did the upgrade, then recalibrate.  The previous version was
00.04.04.SP3, now it's
00.04.05.SP1

Couldn't identify any visible changes in the math or measurement functions.

Still works just like before the upgrade, won't bother trying to downgrade it back, but the traces seems thicker to me, and brighter, much brighter.  It's a sunny summer day outside but still had to dial down the intensity.   :-//

Anybody else seeing thicker and brighter traces with the latest firmware?

--- End quote ---

I see thicker lines, but not brighter like this.

in spanish
Yo veo trazos mas gruesos, pero no asi mas brillantes.

MarkF:

--- Quote from: evb149 on July 18, 2021, 06:19:35 pm ---Is there any good list of what the benefits, feature additions, and feature removals / breaking changes have come with the various
specific firmware revisions, bootloader revisions, hardware revisions, et. al.?

I've got a fairly old model which is running whatever its original firmware / bootloader was and I'm sure there may have been some beneficial
changes but I've heard about things getting broken / worse / limited, too, by firmware "upgrades".

So I'm in a similar position as others have commented here lately: So FW vx.y is available along with many others -- the question : SHOULD (and can) I upgrade, and to which version, and why / at what cost & risk?

--- End quote ---

I bought my DS1074Z back in 2014 and never had any problems upgrading the firmware.  I'm currently running 00.04.04.04.03
The most important upgrade that I can think of is the phase-lock-loop tuning to fix the jitter problem.
Dave did a couple videos on it.

I have never upgraded the bootloader.

Download the 00.04.04.04.03 release, unzip it onto a thumb drive that you know works with the scope and install. 
The zip file also has the install instructions and release notes. 
This version has been out for a long time and there doesn't appear to be any reasons not to install it.

Then you can decide if you want the new version.  (Personally, I'm going to wait until it hits the north america site.) 
As you have probably read, it is next to impossible to revert to an earlier version.

bayati:
@evb149
Just upgrade to this version and you'll be fine:
https://www.rigolna.com/firmware/

It's so unlikly that you brake your DS by just upgrading it. If you did, that's just bad luck.

Fungus:

--- Quote from: evb149 on July 18, 2021, 06:19:35 pm ---I've heard about things getting broken / worse / limited, too, by firmware "upgrades".

--- End quote ---

Where did you hear that? It's not true.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod