Products > Test Equipment
New Rigol DS1054Z oscilloscope
Miti:
For the Windows guys, I can confirm that the key disk can be created using Win32DiskImager and RoGeorge's file. I can upgrade and downgrade as I want. However, I don't get the extra menus. Do I have to press any buttons or it just shows up at drive insertion?
Thanks RoGeorge!
Adrian_Arg.:
RoGeorge, probaste si se corrigio el problema dela sincronización con capturas a 24 megabits, porque en mis pruebas no!
https://electronics.stackexchange.com/questions/517690/rigol-ds1074-oscilloscope-shows-very-wrong-timing
RoGeorge:
--- Quote from: Adrian_Arg. on July 24, 2021, 04:45:16 pm ---RoGeorge, probaste si se corrigio el problema dela sincronización con capturas a 24 megabits, porque en mis pruebas no!
https://electronics.stackexchange.com/questions/517690/rigol-ds1074-oscilloscope-shows-very-wrong-timing
--- End quote ---
Please use English only on this forum.
Yes, the timing is still incorrect at 500ms/div and 24Mpts with the latest FW v00.04.05.01.00 (Software Version 00.04.05.SP1).
The attached capture is a 1Hz square wave signal, therefore the trace should be perfectly aligned with the oscilloscope's grid, yet the first and last falling edges visible in the screen are visibly misaligned from the grid. Cursor and measurements both measure the square wave length as 1040ms instead of 1000ms.
It appears like the signal would have 0.96Hz, yet the generator is generating 1.00Hz precisely. Same signal on a different timebase (for example at 1s/div or at 200ms/div) measures correctly, precisely 1000ms.
RoGeorge:
--- Quote from: Miti on July 24, 2021, 04:33:48 pm ---For the Windows guys, I can confirm that the key disk can be created using Win32DiskImager and RoGeorge's file. I can upgrade and downgrade as I want. However, I don't get the extra menus. Do I have to press any buttons or it just shows up at drive insertion?
Thanks RoGeorge!
--- End quote ---
The service menus are reachable only while the the USB drive with 'Rigol sign disk' is inserted. You need to navigate to those service menus by pressing buttons. For Example:
- press 'Storage' -> 'DiskManage' and you should see an extra disk called "Local SYS". Rotate the "Intensity" knob to select the SYS disk, then press the 'Intensity' knob to see the file names. "Local SYS" disk and files are not visible without a plugged USB with "Rigol sign disk".
- press 'Utility' -> 'Down arrow to move the dot to the second Utilities page" -> "TestModel", and it will show some service menus. "TestModel" menu is not visible without a plugged USB with "Rigol sign disk".
Miti:
--- Quote from: RoGeorge on July 24, 2021, 06:44:42 pm ---The service menus are reachable only while the the USB drive with 'Rigol sign disk' is inserted. You need to navigate to those service menus by pressing buttons. For Example:
- press 'Storage' -> 'DiskManage' and you should see an extra disk called "Local SYS". Rotate the "Intensity" knob to select the SYS disk, then press the 'Intensity' knob to see the file names. "Local SYS" disk and files are not visible without a plugged USB with "Rigol sign disk".
- press 'Utility' -> 'Down arrow to move the dot to the second Utilities page" -> "TestModel", and it will show some service menus. "TestModel" menu is not visible without a plugged USB with "Rigol sign disk".
--- End quote ---
Yes, I've got the menus. Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version