Author Topic: New Rigol DS1054Z oscilloscope  (Read 2042398 times)

0 Members and 3 Guests are viewing this topic.

Offline alsetalokin4017

  • Super Contributor
  • ***
  • Posts: 2055
  • Country: us
Re: New Rigol DS1054Z oscilloscope
« Reply #1775 on: October 22, 2015, 02:50:23 pm »
The response to USB sticks can be very variable. Sometimes you'll get the "Disabled some operations" message and the scope will seem to freeze (progress bar stalls) for a couple or three minutes even before it finishes. For saving screenshots to USB, especially with several channels operating, I've found it generally goes a lot faster if you STOP the scope with the Run/Stop button before pressing the "print" button.
I'm generally using an 8GB FAT32 stick with lots of folders and files already on it.
The easiest person to fool is yourself. -- Richard Feynman
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: New Rigol DS1054Z oscilloscope
« Reply #1776 on: October 22, 2015, 03:57:05 pm »
It is recommended that the capacity of the USB storage device being used with this oscilloscope is no larger than 8 GBytes.
There's no reason at all the disk size would make a difference, it's just numbers.

Cluster sizes? Sure - buffer overruns and all that.

Not total disk size though.

Size does make a difference, but indirectly. It affects the default cluster size that's used on the storage medium. The documentation, however, was written for non-technical people (i.e., obscure the details), which makes life more difficult for technical folks, unfortunately.

Of course, putting the actual storage specifications in the specs section of the docs would have been nice.
TEA is the way. | TEA Time channel
 

Offline fvera

  • Newbie
  • Posts: 2
  • Country: us
Re: New Rigol DS1054Z oscilloscope
« Reply #1777 on: October 23, 2015, 10:49:13 pm »
Looking to place an order, could someone kindly PM the coupon code.

Regards,
Fernando
 

Offline Fennec

  • Regular Contributor
  • *
  • Posts: 135
  • Country: 00
Re: New Rigol DS1054Z oscilloscope
« Reply #1778 on: October 24, 2015, 12:37:08 am »
@alsetalokin4017

Thx for the files. Now I could reproduce all your issues. Exactly the same. Based on your topic https://www.eevblog.com/forum/testgear/new-rigol-ds1054z-oscilloscope/msg781316/#msg781316

The trigger issus I have with timebase set to 50µs only. Math and zoom is the 120k (120k only) / HighRes bug. See the pix.
« Last Edit: October 24, 2015, 12:46:30 am by Fennec »
 

Offline rosbuitre

  • Regular Contributor
  • *
  • Posts: 90
  • Country: ar
Re: New Rigol DS1054Z oscilloscope
« Reply #1779 on: October 27, 2015, 09:12:41 am »
New firmware received by mail from RIGOL

Regards



My instruments: DMM Keysight 34461A / Tektronix DMM916 / Fluke 12, Rigol DS1074Z, Deer DE-5000, Siglent SDG805 / SDP3303D, Dayton Dats2
 

Offline hayatepilot

  • Frequent Contributor
  • **
  • Posts: 263
  • Country: ch
Re: New Rigol DS1054Z oscilloscope
« Reply #1780 on: October 27, 2015, 10:54:37 am »
@rosbuitre

Nice!
Did you notice any changes/improvements?
Were any of the bugs fixed?

Greetings
 

Offline crispy_tofu

  • Super Contributor
  • ***
  • Posts: 1124
  • Country: au
Re: New Rigol DS1054Z oscilloscope
« Reply #1781 on: October 27, 2015, 10:59:14 am »
@rosbuitre

Nice!
Did you notice any changes/improvements?
Were any of the bugs fixed?

Greetings

+1, I would also like to know.  :-+
 

Offline rosbuitre

  • Regular Contributor
  • *
  • Posts: 90
  • Country: ar
Re: New Rigol DS1054Z oscilloscope
« Reply #1782 on: October 27, 2015, 12:13:28 pm »
@rosbuitre

Nice!
Did you notice any changes/improvements?
Were any of the bugs fixed?

Greetings

Hi
I had no time to try it, only just install

Regards
+1, I would also like to know.  :-+
My instruments: DMM Keysight 34461A / Tektronix DMM916 / Fluke 12, Rigol DS1074Z, Deer DE-5000, Siglent SDG805 / SDP3303D, Dayton Dats2
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: New Rigol DS1054Z oscilloscope
« Reply #1783 on: October 27, 2015, 02:04:15 pm »
Hi,

New firmware received by mail from RIGOL

Regards

Do you mind to share ?. I just checked the rigol's website, and only previous version is listed.

Cheers.
---
Daniel
 

Offline rosbuitre

  • Regular Contributor
  • *
  • Posts: 90
  • Country: ar
Re: New Rigol DS1054Z oscilloscope
« Reply #1784 on: October 27, 2015, 02:53:50 pm »
Hi,

New firmware received by mail from RIGOL

Regards

Do you mind to share ?. I just checked the rigol's website, and only previous version is listed.

Cheers.
---
Daniel


Shared, please confirm if they can download.
Following the instructions I could not install, recognizes new version when you insert the pen drive.

https://drive.google.com/file/d/0B6F_CSCAsnsoS0dtQ3BLNV9yUTg/view?usp=sharing

https://drive.google.com/file/d/0B6F_CSCAsnsoZjFyRmdkVUQzZ3M/view?usp=sharing

Regards
My instruments: DMM Keysight 34461A / Tektronix DMM916 / Fluke 12, Rigol DS1074Z, Deer DE-5000, Siglent SDG805 / SDP3303D, Dayton Dats2
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: New Rigol DS1054Z oscilloscope
« Reply #1785 on: October 27, 2015, 03:21:33 pm »
Hi,

Hi,

New firmware received by mail from RIGOL

Regards

Do you mind to share ?. I just checked the rigol's website, and only previous version is listed.

Cheers.
---
Daniel


Shared, please confirm if they can download.
Following the instructions I could not install, recognizes new version when you insert the pen drive.

https://drive.google.com/file/d/0B6F_CSCAsnsoS0dtQ3BLNV9yUTg/view?usp=sharing

https://drive.google.com/file/d/0B6F_CSCAsnsoZjFyRmdkVUQzZ3M/view?usp=sharing

Regards

Many thanks, I'll upgrade in a few minutes. BTW, the update procedure in the document from the second sharing URL is wrong. AFAIK there is no bootloader in DS1000Z, so the help button have no action on startup.

Cheers.
---
Daniel
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: New Rigol DS1054Z oscilloscope
« Reply #1786 on: October 27, 2015, 04:45:35 pm »
Correct. Just plug in the USB drive with the file in the root directory and the scope will prompt to install it.
TEA is the way. | TEA Time channel
 

Offline f1rmb

  • Regular Contributor
  • *
  • Posts: 180
  • Country: fr
Re: New Rigol DS1054Z oscilloscope
« Reply #1787 on: October 27, 2015, 05:03:27 pm »
Okay, just flashed, reset to default, autocal, and the freezing bug looks still there :-(


Cheers
---
Daniel
 

Offline Fennec

  • Regular Contributor
  • *
  • Posts: 135
  • Country: 00
Re: New Rigol DS1054Z oscilloscope
« Reply #1788 on: October 27, 2015, 07:32:14 pm »
Did a quick check.

Freeze bug does'nt fixed
Math issue does'nt fixed
50µs timebase / trigger issue seems to be fixed... Iam not sure, maybe someone else can check it too.

BUT

I feel the whole scope is much slower.
The probe devider setting is a procedure like hell now. Pain in the ass. Useless < My knob is broken
If I turn on all 4 channels and the brightness changes with the memory settings. The channels are flickering now.

I play a little with this firmware and change back to SP1 that's for sure.
/Edited
« Last Edit: October 27, 2015, 08:10:04 pm by Fennec »
 

Offline strimarc

  • Newbie
  • Posts: 3
  • Country: us
Re: New Rigol DS1054Z oscilloscope
« Reply #1789 on: October 27, 2015, 08:12:56 pm »
I'm looking to buy a new DS1054z..  Can someone give me the discount code eevblog members?  Thanks in advance.
 

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: New Rigol DS1054Z oscilloscope
« Reply #1790 on: October 27, 2015, 09:48:48 pm »
No code needed. Just use the online chat.
TEA is the way. | TEA Time channel
 

Offline ankerwolf

  • Regular Contributor
  • *
  • Posts: 58
  • Country: at
Re: New Rigol DS1054Z oscilloscope
« Reply #1791 on: October 27, 2015, 11:16:30 pm »
Did you notice any changes/improvements?
Yes, many German incorrect translations which I had reported.
 

Offline MarkF

  • Super Contributor
  • ***
  • Posts: 2522
  • Country: us
Re: New Rigol DS1054Z oscilloscope
« Reply #1792 on: October 28, 2015, 12:40:59 am »
I'm looking to buy a new DS1054z..  Can someone give me the discount code eevblog members?  Thanks in advance.

PM sent.
 

Offline alsetalokin4017

  • Super Contributor
  • ***
  • Posts: 2055
  • Country: us
Re: New Rigol DS1054Z oscilloscope
« Reply #1793 on: October 28, 2015, 03:47:16 pm »
Well, that's interesting. I reported the FreezeBug to Rigol when I found it, and was assigned a number and was told there would be a new firmware in October. I get notifications of sales and equipment from Rigol but I have heard _nothing_ from them about this new firmware.

And it seems like it is causing problems and doesn't actually fix the important stuff like the freeze bug and the math horizontal error.

So I downloaded it from rosbuitre's link but I'm not going to install it just yet, due to the reports of slowing, flickering, not fixing the bugs, etc.

What is the matter with Rigol? It seems like they are really dropping the ball on this one. The "firmware" needs a complete rewrite, I think.
The easiest person to fool is yourself. -- Richard Feynman
 

Offline JohnPen

  • Regular Contributor
  • *
  • Posts: 240
  • Country: gb
Re: New Rigol DS1054Z oscilloscope
« Reply #1794 on: October 28, 2015, 05:00:46 pm »
I have noted that Rigol UK is saying the latest s/w--f/w is now 00.04.03.SP2 so I have downloaded from the link provided by rosbuitre but not proceeded any further yet.  Maybe try it tomorrow.

John
 

Offline ankerwolf

  • Regular Contributor
  • *
  • Posts: 58
  • Country: at
Re: New Rigol DS1054Z oscilloscope
« Reply #1795 on: October 28, 2015, 07:31:21 pm »
My first quick check with the new Update 00.04.03.SP2:
No Trigger Bug more - all ok ;D
« Last Edit: October 28, 2015, 11:34:11 pm by ankerwolf »
 

Offline JohnPen

  • Regular Contributor
  • *
  • Posts: 240
  • Country: gb
Re: New Rigol DS1054Z oscilloscope
« Reply #1796 on: October 28, 2015, 08:08:45 pm »
Freeze bug is just the same with this new firmware. UGH!
John
 

Offline nanofrog

  • Super Contributor
  • ***
  • Posts: 5446
  • Country: us
Re: New Rigol DS1054Z oscilloscope
« Reply #1797 on: October 28, 2015, 09:10:58 pm »
My first quick check with the new Update:
No Trigger Bug more - all ok ;D
Has the UI become sluggish with this newest release?
 

Offline ankerwolf

  • Regular Contributor
  • *
  • Posts: 58
  • Country: at
Re: New Rigol DS1054Z oscilloscope
« Reply #1798 on: October 28, 2015, 11:06:11 pm »
Hello,
no Zoom Bug more (00.04.03.SP2) - look
« Last Edit: October 28, 2015, 11:34:32 pm by ankerwolf »
 

Offline ankerwolf

  • Regular Contributor
  • *
  • Posts: 58
  • Country: at
Re: New Rigol DS1054Z oscilloscope
« Reply #1799 on: October 28, 2015, 11:32:33 pm »
Hello,
with 00.04.03.SP2
1) now I can't see the Math bug - can anyone check it too (what procedure?)

2) Math & Zoom lookes good, BUT LAN FREEZING !!! (more check needed)

3) now: NO !!  Freeze bug as shown here
https://www.eevblog.com/forum/testgear/new-rigol-ds1054z-oscilloscope/msg781316/#msg781316
« Last Edit: October 28, 2015, 11:39:10 pm by ankerwolf »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf