Products > Test Equipment
New Rigol HDO1000 12-bit DSO - BUGs
skander36:
Yes. I always need to "drag" it from the bottom ... :)
I forgot about this. Usually I'm using Rigol 5k for protocol decoding.
Alex-lab:
Some new bugs and "features":
a) If you select save both PNG and CSV on Quick, after restart it will save PNG and BIN.
b) File names are still like Rigol1, Rigol2... quite annoying, I would prefer to have simple date-time stamp, as we have for smartphone photos.
c) Appearance of waveforms in PNG files depends on the Run/Stop state. - Not sure, if this is a bag. In running mode it looks much smoother (High-res).
d) Real bug. If you stop the waveform, then change x-scale (s/div) for more details, after that varying the x-position breaks x-scale factor. So you have the original appearance of the waveform (as it was at stop pressed), but with a wrong X-scale. Doing the same in reverse order can bring it back into correct original view.
Fungus:
--- Quote from: Alex-lab on November 23, 2023, 11:41:52 pm ---a) If you select save both PNG and CSV on Quick, after restart it will save PNG and BIN.
--- End quote ---
Might be related to the whole "state isn't saved correctly" bug on the DHO800. There's a few things that don't save there.
--- Quote from: Alex-lab on November 23, 2023, 11:41:52 pm ---b) File names are still like Rigol1, Rigol2... quite annoying, I would prefer to have simple date-time stamp, as we have for smartphone photos.
--- End quote ---
Does it have a RTC with battery? If not, it's going to be worse.
--- Quote from: Alex-lab on November 23, 2023, 11:41:52 pm ---c) Appearance of waveforms in PNG files depends on the Run/Stop state. - Not sure, if this is a bag. In running mode it looks much smoother (High-res).
--- End quote ---
On the DHO800 there's a display setting called "Waveform freeze" to control this.
NE666:
--- Quote from: Fungus on November 24, 2023, 12:50:39 am ---Does it have a RTC with battery?
--- End quote ---
Yes, it does. So an option for timestamp based filenames would be nice.
Alex-lab:
--- Quote from: Fungus on November 24, 2023, 12:50:39 am ---On the DHO800 there's a display setting called "Waveform freeze" to control this.
--- End quote ---
Indeed, but it doesn't change anything.
Some more bugs:
a) Adjusting Y-position makes incorrect rounding for zero value on the scale. In fact it is not a zero, but instead a very small value (like 26.048uV).
b) Incorrect evaluation of Vbase value. Here is just example, same issue is for many periods of the same signal.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version