Products > Test Equipment

New Scope Demoboard from Batronix

<< < (21/65) > >>

JOSM:
Mine arrived two days ago. I have tried some of the different options already. And they work well. The manual is very good indeed. I do not regret my purchase.
I would like to use the board to show younger people how to use an oscilloscope. But it is not easy to find interested ones.

pdenisowski:

--- Quote from: Ulrich.G on June 09, 2023, 05:35:52 am ---Nice too see this scope between all this high end equipment. I also own an old HM2008 Combiscope. I wonder how the demo board signals are looking on this...  ::)

--- End quote ---

I'm still amazed that the old Hameg scope does averaging:  I think the max average count is 256 (in steps of 2^N), but even at lower numbers of averages, it works pretty well.  That said, I think that it can only test about 10% of the Batronix demo board functions, which says a lot about how far we've come in the last few decades.

Oh, and it also does a really nice job in XY mode :)


--- End quote ---


Martin72:
Today, better a few minutes ago, I check the bodeplot and XY demo.
For the bode plot the demo board got a lowpass and bandpass filter, I didn´t check if its an active one or passive.
Connecting is simply: Output of the generator (in this case the built-in of my HD scope) into the filterinput via bnc, then one probe to the testpoint "In", the other to "BP" or "LP", thats it..
I´ll follow the suggestion of the manual and adjusted the range between 200hz and 10Mhz.
Then checking XY - something I never used before  :-X ;)
Therefore I was a little bit surprised, how less you can do/adjust in this mode.
Also that I must change the connection of the scope, before it was Ch1 and Ch4, but that won´t work, it must be Ch1 and Ch2.
Known stuff for other, but new to me.. ;)
Nevertheless, the setup is simple and worked immediately.
Pics showing the demoboard´s BP at 5khz and 1khz (you can play along with the frequencies on board).
The displaying of the XY and the channels simultaneously like in the screenshot of the manual seems not possible on the siglent.
Martin

pdenisowski:

--- Quote from: Martin72 on June 10, 2023, 08:24:07 pm ---Then checking XY - something I never used before  :-X ;)

--- End quote ---

Just yesterday my video on XY mode was published on the R&S YouTube channel :)



In my experience, most people aren't aware of all the different ways of using XY mode.

I'm also doing a video specifically on Lissajous patterns, but it won't come out for a couple of weeks.

Martin72:
 :-+

Being able to see the two channels involved at the same time with the XY display I feel is an advantage.
This would be a nice feature update for my siglent scope. 8)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod