Products > Test Equipment
New Scope Demoboard from Batronix
<< < (48/65) > >>
Performa01:

--- Quote from: Grandchuck on February 14, 2024, 04:20:01 pm ---Here is the delay from TP1 to TP6 on the demo board.

--- End quote ---
Cursors are bit outdated nowadays, especially in an analytical DSO. What about using the automatic FRFR measurement instead?
Grandchuck:
Done!  Still learning.  This is going to take a while.  :P
Martin72:

--- Quote --- Martin, I am on page 48
--- End quote ---

For others, this is the "Hf Test Track" section.
Mainly responsible are two fast risetime logic gate ICs (tr<450ps), one IC is directly connected to the RF out BNC socket, so that you have a quite fast pulse at the start.
The signal also looks pretty clean.
mwb1100:
Is that SDS1104X-E stock (100Mhz) or hacked to 200MHz?
Martin72:
Hi,

100Mhz "untouched", loaned from work until new scope arrives.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod