| Products > Test Equipment |
| New Scope Demoboard from Batronix |
| << < (13/65) > >> |
| pdenisowski:
I worked through section 2.10 and everything has worked as expected. A quick update: 1) I like the fact that the runt trigger (2.4.8 ) example produces runts of different amplitudes 2) The input coupling example (2.5) is also nice for showing how AC coupling allows you to see noise/ripple on a DC signal [see attached] 3) Roll mode demo (2.6) was also helpful, since this can be hard to demo otherwise 4) The noisy square wave to show the effect of averaging (2.7.1) is a nice demo. I did however increase the number of average above the recommended 16 to get a more dramatic "cleaning up" of the signal [see attached] 5) The peak detector (2.7.2) demo was also helpful, but here I did wish the manual explained why you see the double line 6) And I always like a nice persistence demo (2.10) The "intermittent" signal that shows up when persistence is enabled could also be used for some advanced triggering exercises and/or as a way to demonstrate the effect of acquisition rate (how long until you see the signal?) I'll probably experiment with this more later. [see attached] My plan is to skip ahead and do all the serial decode examples next, since I did videos on most of these already :) I'm intentionally saving FFT for last, since this is also a challenging thing to demonstrate. Am I happy with it so far? Yes, very :) |
| 2N3055:
Grrr now I have to wait for it to come while watching other kids play... :-DD |
| pdenisowski:
--- Quote from: 2N3055 on June 05, 2023, 08:36:29 pm ---Grrr now I have to wait for it to come while watching other kids play... :-DD --- End quote --- Sorry - I need to go through the entire demo guide as quickly as possible so I can get back to what I was working on before Martin72 derailed me (danke, Kumpel :)) I have five new YouTube videos sitting in my post-production queue (including, of all things, "Getting Started with MXO Series Oscilloscopes - Triggering Fundamentals") and I need to get them over to our social media team sooner than later. |
| Martin72:
--- Quote ---4) The noisy square wave to show the effect of averaging (2.7.1) is a nice demo. I did however increase the number of average above the recommended 16 to get a more dramatic "cleaning up" of the signal --- End quote --- Checked this on my HD, with 64 averaging and took this as REF A. Nice thing I didn´t noticed so far: If you change the color of the REF trace, the hardware REF button will change it´s color too...Cool. 8) |
| JOSM:
I was looking for an oscilloscope demo board as well. I could not decide on one of the Rigol or Siglent options yet, mainly because of the price point of more than 200 €. And why yet another toy? So, I decided to bury the plan. This thread brought the wish back to life. Thank You Martin :palm: Waiting for UPS... |
| Navigation |
| Message Index |
| Next page |
| Previous page |