Products > Test Equipment
New Siglent SPD4000X series power supply
TheDefpom:
--- Quote from: tautech on November 29, 2024, 12:13:02 am ---
--- Quote from: TheDefpom on November 28, 2024, 11:55:34 pm ---Attached is the Test Controller definition, I will probably tweak it more later, possibly to add the list feature etc. but for now this is probably good enough, I will be posting this on the thread by HKJ as well for inclusion in future releases.
I noticed in the manual it mentions an X-E and X-C variant... I have ignored those for now as they are not mentioned in the data sheet.
--- End quote ---
Only applicable to SPD3000 models.
In the west we only have SPD3303X and X-E.
--- End quote ---
Might want to tell Siglent to fix the user manual then, page 17 list 3 variants for each model.
TheDefpom:
cough...
Review Part 1:
TheDefpom:
SDM4306X Review Part 2, the teardownoning.... also look at the web server function along with the Test Controller definition I wrote:
Furna:
--- Quote from: TheDefpom on December 03, 2024, 08:57:41 am ---cough...
Review Part 1:
--- End quote ---
I have firmware version 4.1.2.8R1
40':30'' 10.000V bug for CH1 and CH4 is not present in my SPD4121X
Furna:
--- Quote from: TheDefpom on December 05, 2024, 09:31:38 am ---SDM4306X Review Part 2, the teardownoning.... also look at the web server function along with the Test Controller definition I wrote:
--- End quote ---
I have firmware version 4.1.2.8R1 on SPD4121X
14':30'' On my PSU in the web interface Description and Hostname are correct. Lan Settings are correctly populated and Modify LAN Settings works properly.
I have shorter delays when changing Vset and Iset. Also Volt and Current values are shown with shorter delays.
Wireshark (network protocol analyzer) demostrates all communication go through TCP80.
Also, you didn't realize that "Download" in the List settings, actually uploads the list from the browser to the PSU. Confusing I know but it seems chinese people are confusing the concept quite often.
You have to re-"Downalod" the list for each chnage you do i.e. when enabling "continuos" cycling.
When Continuos cycling is running, you have to press Play again to stop it.
For your issues I would try a different browser (it might solve the "delays" and Lan settings not popualating/working) and re-flashing the firmware (it might solve the Description and Hostname issue.)
Definitely the Web Interface need improvements.
Thank you for the device definitions in TC!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version