Products > Test Equipment
SPD1168X and SPD1305X Siglent PSU's
tautech:
New firmware for SPD1168X and SPD1305X models.
Version V2.1.1.9
585 KB
https://int.siglent.com/upload_file/zip/firmware/Power_Supply/SPD1168X_V2.1.1.9_EN.zip
https://int.siglent.com/upload_file/zip/firmware/Power_Supply/SPD1305X_V2.1.1.9_EN.zip
Release notes
Added the OCP function (Long push “Fine” to enter or exit OCP function)
Fixed a command stop character bug
Algoma:
EasyPower gave me an "Invalid update" message with the update. Re-applied v2.1.1.8 as a test, then v2.1.1.9 updated as expected.
Nice to have an OCP option when needed, I was thinking about missing that feature a few weeks ago. Being firmware driven, CC Mode kicks in well before OCP triggers in about 300ms. Both CC and OCP settings remain active at their set points. Worked well to protect a simple Red LED under reasonable conditions.
tautech:
New firmware for SPD1000X models.
Version: V2.1.1.9R1
~600kb
https://int.siglent.com/upload_file/zip/firmware/Power_Supply/SPD1305X_V2.1.1.9R1_EN.zip
https://int.siglent.com/upload_file/zip/firmware/Power_Supply/SPD1168X_V2.1.1.9R1_EN.zip
Release notes
Fixed a static IP can not be saved bug
Mahagam:
--- Quote from: tautech on January 27, 2022, 07:21:14 am ---Release notes
Added the OCP function (Long push “Fine” to enter or exit OCP function)
--- End quote ---
Do you know if there is an corresponding SCPI command for this setting?
tautech:
--- Quote from: Mahagam on March 20, 2024, 10:33:17 pm ---
--- Quote from: tautech on January 27, 2022, 07:21:14 am ---Release notes
Added the OCP function (Long push “Fine” to enter or exit OCP function)
--- End quote ---
Do you know if there is an corresponding SCPI command for this setting?
--- End quote ---
Not in the SPD1000X manual but found in the SDP5000X manual on P82/82
https://int.siglent.com/u_file/download/22_06_28/SPS5000X_Usermanual_E02B.pdf
Please report success or otherwise.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version