Products > Test Equipment
New toy(?) scope, DSO154pro, 1ch, claimed 40MS/s
Fungus:
--- Quote from: Matamipru on January 10, 2023, 03:47:00 pm ---The alligator show square wave better than probe x1 and x10.
--- End quote ---
It should be about the same as 1x.
Here's mine with the probe on 1x:
And here with the probe on 10x:
There's quite a difference in bandwidth.
(voltage is low because I'm testing battery life and there's only one pixel of battery left...)
Fungus:
--- Quote from: Fungus on January 10, 2023, 03:57:35 pm ---(voltage is low because I'm testing battery life and there's only one pixel of battery left...)
--- End quote ---
Update: Battery indicator turned red and some strange glitches started to appear on the signal:
Fungus:
Update2: Battery indicator is flashing and the glitches are getting much worse:
__Jack__:
Thanks colleagues. You were right. In my measurements I have both crocodiles and probe x1 connected together.
Yesterday I made comparisons with my Rigol osciloscope and it turned out that x1 probe has some kind of lowpass filter.
Even Zeeweii manufacturer told me about it when I described them my problems.
I do not know why they attache such probe, but any other probes I have , do not cut bandwith by lowpass filter on x1 position.
Regards
Jack
Fungus:
--- Quote from: __Jack__ on January 11, 2023, 05:25:24 am ---I do not know why they attache such probe, but any other probes I have , do not cut bandwith by lowpass filter on x1 position.
--- End quote ---
Try your Rigol probe on this 'scope... :popcorn:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version