Products > Test Equipment
News about Rigol DP932E
<< < (3/6) > >>
2_71:

--- Quote from: tautech on December 28, 2022, 12:13:23 am ---
--- Quote from: 2_71 on December 27, 2022, 06:21:26 pm ---Here's a photo of the front

--- End quote ---
Where are the quick access Series and Parallel mode buttons ?

--- End quote ---

Utility button -> Output -> CH-Connection drop-down menu [independent/parallel/series]

I find having dedicated numerical buttons on the front panel to be much more useful. But it would have been nice to have both.
2_71:

--- Quote from: radensb on December 27, 2022, 10:49:32 pm ---Its physically got the DIO port and Arb button, which are features Rigol says are not available on the E model. This tells me that they may be with some creative work.


* Can you look in the settings and show us what the upgradable options are? This may change based on what model is listed in some config file.
* Would you be willing to open the unit and take some high res pics of the internals? Things like board part numbers, etc? I recall that the DB832 had boards marked as DP823A, which was a big giveaway.
Looks like a solid unit! Thanks for providing us info!

--- End quote ---



Just from memory, there's an "upgrade" section in the menu that lists only the DP900-HIRES option for purchase. However, most of the options in the utility menu give a "Option not included with this version. Please buy." message on the screen when denying access to the trigger/arb/(one other one I forget) functions. I'll take another look at it and attempt to disassemble the case to get some more photos.

Is there an easy way to post high-res photos? I kept getting a 5Mb limit per post message and had to reduce the image quality to get it to go through.
tautech:

--- Quote from: 2_71 on December 28, 2022, 12:47:50 am ---
--- Quote from: tautech on December 28, 2022, 12:13:23 am ---
--- Quote from: 2_71 on December 27, 2022, 06:21:26 pm ---Here's a photo of the front

--- End quote ---
Where are the quick access Series and Parallel mode buttons ?

--- End quote ---

Utility button -> Output -> CH-Connection drop-down menu [independent/parallel/series]

--- End quote ---
Thanks, I half expected that.

--- Quote from: 2_71 on December 28, 2022, 12:57:07 am ---Just from memory, there's an "upgrade" section in the menu that lists only the DP900-HIRES option for purchase. However, most of the options in the utility menu give a "Option not included with this version. Please buy." message on the screen when denying access to the trigger/arb/(one other one I forget) functions. I'll take another look at it and attempt to disassemble the case to get some more photos.
--- End quote ---
Ah, sounds like some features waiting/begging to be hacked.


--- Quote ---Is there an easy way to post high-res photos?
--- End quote ---
No other than provide a link to them externally hosted.
Do the forum a favor and reduce them to fit within forum limits.
giubin:

--- Quote from: 2_71 on December 27, 2022, 06:22:18 pm ---and the back

--- End quote ---

Wow, thanks man. This is good news. D-IO and Arb button on the front. I'm pretty sure that in the near future, someone will find a way to "upgrade" this beauty.
Xoff:
For all wanted to communicate with DP932E over the LAN, Rigol has changed standard SCPI port (5555) to 5025.
I can recommend to use 'EEZ Studio 0.9.97' (https://github.com/eez-open/studio) - cross-platform run-time (Linux, Windows, Mac OS X).

In addition to standard USB firmware upgrade (DP900_DP2000_Update.GEL), there is also an internet upgrade option: Rigol > Help > Upgrade > Remote.
Firmware version of DP932E calibrated on 2022/9/25 is 01.00.01.00.16 On Rigol site you can find firmware dated 06/07/2022 (so it looks to be older version).
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod