Products > Test Equipment

Open source lxi-tools v2.0 released

<< < (13/22) > >>

coromonadalix:
Woah  i lost some threads ....



--- Quote from: lundmar on October 19, 2022, 08:28:03 am ---@coromonadalix: Feel free to let me know if you get the Agilent L4411A working with lxi-tools. Then I can add it to our list of tested instruments. Thanks.

--- End quote ---

LXI tools like the Keysight software's ??? DMM connectivity 1.0.2.0  ok,  benchvue(s)  2017 and up are ok,  i/o librairies suite ok 

Even a basic excel sheet w macros seems to work  BUT  i think the meter as to be ready to take the measurement(s)   there is a command i don't catch ...   

Maybe thru the CONFig  command or the SENSe command  ??? before the MEASurement commands  from the sheet link  (previous thread)


Kinda  lost a little  loll   for now I'm connected thru usb  since i don't have an AR488 gpib dongle ... has to order the @artag boards


QUESTION :  could it be ported to android as an app ??? But i do think about an RASPI touchscreen version like an  cpi-a070wr (raspi panel pc)  who sit somewhere

I have an crazy idea to remotely control the meter / far away  ....   but controlled with an simple tool

I do know about some ar488 with esp wifi add on ...


I'm trying other softwares like testcontrol, but have an hard time figuring out the menus and some meter functions, even some visual studio codes etc ...   

I'm sad to see  there is no interest foe the 34410 / 34411 / l4411 series,  not sure the coding of the 34461  can or could work ??

ralphrmartin:

--- Quote from: lundmar on October 28, 2022, 04:22:25 pm ---
But lxi-gui starts regardless of these errors right?

I'm getting similar errors when I start lxi-gui from the edge channel. It is errors thrown from GTK4 - they seem to vary depending on GTK4 version used so I think it is ok to ignore them.

The difference of the snaps are that on the edge channel I'm using a new snap base image (core22). It should be faster to launch.

--- End quote ---

Yes, lxi-gui seems to start OK. I'll ignore them for now, then, thanks, but will report back if something seems not to actually function ok.

lundmar:

--- Quote from: coromonadalix on October 28, 2022, 06:16:39 pm ---QUESTION :  could it be ported to android as an app ??? But i do think about an RASPI touchscreen version like an  cpi-a070wr (raspi panel pc)  who sit somewhere

--- End quote ---

Sorry, no Android app.

Yes, you can install lxi-tools on Raspian or other Linux distros such as Ubuntu and it will just work.


--- Quote from: coromonadalix on October 28, 2022, 06:16:39 pm ---I have an crazy idea to remotely control the meter / far away  ....   but controlled with an simple tool

--- End quote ---

lxi-tools is a really simple tool for managing any of your network attached LXI compatible instruments. Just plug in your instrument on your LAN network and fire up lxi-tools and it should discover it.

lundmar:
I've released lxi-tools v2.3 which is a minor bug fix release that fixes an annoying bug with selecting instruments and copying IP or ID.

https://github.com/lxi-tools/lxi-tools/releases/tag/v2.3

As usual, latest version is immediately available via snap. Distributions will catch up later.

lundmar:
lxi-tools v2.4 has been released: https://github.com/lxi-tools/lxi-tools/releases/tag/v2.4


--- Code: ---Changes since lxi-tools v2.3:

    Prefix all lua functions with lxi_

    To avoid conflict with existing lua APIs.

--- End code ---

This means lua scripts will have to be updated to call the new lua function names.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod