Products > Test Equipment
oscilloscope recommendation for hobby use
<< < (3/15) > >>
MMMarco:

--- Quote from: Martin72 on June 19, 2023, 10:27:58 pm ---- Rigol is known for it´s buggy software plus slow debugging time

--- End quote ---

+1 for that one. I own a DS1054Z and I'm not blown away by its software ; wouldn't buy again.
skander36:

--- Quote from: Aurgelme on June 19, 2023, 10:21:25 pm ---Thank you both for your kind replies.

Then it seems that the order of the scopes I wrote in the first post agrees with what you know about them.

Micsig TO3004 is already in stock at the supplier, so I think I'll go for this, even if it will possibly be a challenge to learn how to use the touch screen.

--- End quote ---

- I wouldn't be so hurry in your place going to Micsig. It is too loud. Check here before buy: https://www.eevblog.com/forum/testgear/micsig-new-oscilloscopes-on-website/msg4767260/#msg4767260
Also FFT settings are so limited that Rigol seem high end one. Beside FFT it has only Double wave, AX+B and advanced Math (which let you input some simple expressions). Attached is Micsig math tab. And indeed the touch interface is awfull, at least at the begining.
- Rigol with DHO1000 has quickly fixed the firmware so you may have luck also with the new DHO9xx. I am pretty satisfied with my DHO 1000 with the lates fw.
... but if you are coming from Tektronix 2213, I guess you will be a match for Siglent ... old, stable, polished.
Fungus:

--- Quote from: Aurgelme on June 19, 2023, 06:22:24 pm ---I need a new hobby scope as my old scope Tektronix 2213 which I have had since 1982 is completely worn out.

--- End quote ---

What did you use it for most?
Martin72:

--- Quote ---I am pretty satisfied with my DHO 1000 with the lates fw.
--- End quote ---

That´s good to hear, but then why are the rigol threads "dead" ?
Keep them up to date, fill them with life.
Fungus:

--- Quote from: MMMarco on June 19, 2023, 11:09:17 pm ---
--- Quote from: Martin72 on June 19, 2023, 10:27:58 pm ---- Rigol is known for it´s buggy software plus slow debugging time

--- End quote ---

+1 for that one. I own a DS1054Z and I'm not blown away by its software ; wouldn't buy again.

--- End quote ---

What are you using as a reference point when you say that?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod