Products > Test Equipment
Oscilloscope Zoom Out Quirk
<< < (105/113) > >>
Fungus:

--- Quote from: Someone on March 07, 2021, 11:34:25 pm ---there are some scopes that don't let you set the capture window larger than the window visible on the screen. Its a valid design decision and one I prefer.

--- End quote ---

Sure, but it's often useful and you should be allowed to override the behavior if you want to.

https://youtu.be/bVxDibdosdI?t=741

Surely the Siglent won't slow down because you use more than 10 bytes of memory...?  :-//

EEVblog:
In another thread some users claimed that the Siglent 5000 series DOES have zoom out capability.
I just tried on the SDS5104X and it does NOT in Auto memory mode but it DOES in fixed memory depth mode.
I think zoom mode might have been mentioned, but that's not the point.
tautech:

--- Quote from: EEVblog on October 20, 2022, 07:45:25 am ---In another thread some users claimed that the Siglent 5000 series DOES have zoom out capability.
I just tried on the SDS5104X and it does NOT in Auto memory mode but it DOES in fixed memory depth mode.
I think zoom mode might have been mentioned, but that's not the point.

--- End quote ---
Memory management and its options/guises are a recently added feature to SDS5000X in the FW version V0.9.7R2 before last.
It was developed in SDS2000X HD and SDS6000A.
dreamcat4:

--- Quote from: tautech on October 20, 2022, 08:21:53 am ---Memory management and its options/guises are a recently added feature to SDS5000X in the FW version V0.9.7R2 before last.
It was developed in SDS2000X HD and SDS6000A.

--- End quote ---

aah interesting... so maybe it could be coming to any other remaining models featuring same / similar shared firmware platform? Or perhaps it requires a specific set of hardware common in those listed above? ^^
EEVblog:

--- Quote from: dreamcat4 on October 20, 2022, 08:49:18 am ---
--- Quote from: tautech on October 20, 2022, 08:21:53 am ---Memory management and its options/guises are a recently added feature to SDS5000X in the FW version V0.9.7R2 before last.
It was developed in SDS2000X HD and SDS6000A.

--- End quote ---
aah interesting... so maybe it could be coming to any other remaining models featuring same / similar shared firmware platform? Or perhaps it requires a specific set of hardware common in those listed above? ^^

--- End quote ---

It would be an FPGA capture architecture thing I think, not the processor firmware as such.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod