Products > Test Equipment
OWON HDS2102S 2CH
(1/6) > >>
naiclub:
Hello everyone, I would like to ask about OWON HDS2102S 2CH.
Is it good to use or not? How? I'm very interested and would like to own one.
tunk:
There's quite a bit of discussion about the HDS200(0) series here:
https://www.eevblog.com/forum/testgear/owon-hds-200-handheld-oscilloscope-w-builtin-dmmawg/
naiclub:

--- Quote from: tunk on January 30, 2024, 04:54:33 pm ---There's quite a bit of discussion about the HDS200(0) series here:
https://www.eevblog.com/forum/testgear/owon-hds-200-handheld-oscilloscope-w-builtin-dmmawg/

--- End quote ---
https://drive.google.com/file/d/1xgQMMxsRU6Fo8YkoVMHfjo47ohSRXH5f/view?usp=drive_link
I have ZOYI ZT-702s which can measure electricity in the AC220V area directly, but I'm not sure if the OWON HDS2102S 2CH can do this or not. And another thing, the FNIRSI-1014D Can't measure 220V electricity directly either. It must pass through a special 100:1 probe wire only to be able to measure directly.
csuhi17:

--- Quote from: naiclub on January 30, 2024, 05:15:11 pm ---
--- Quote from: tunk on January 30, 2024, 04:54:33 pm ---There's quite a bit of discussion about the HDS200(0) series here:
https://www.eevblog.com/forum/testgear/owon-hds-200-handheld-oscilloscope-w-builtin-dmmawg/

--- End quote ---
https://drive.google.com/file/d/1xgQMMxsRU6Fo8YkoVMHfjo47ohSRXH5f/view?usp=drive_link
I have ZOYI ZT-702s which can measure electricity in the AC220V area directly, but I'm not sure if the OWON HDS2102S 2CH can do this or not. And another thing, the FNIRSI-1014D Can't measure 220V electricity directly either. It must pass through a special 100:1 probe wire only to be able to measure directly.

--- End quote ---

Max. input Voltage 400V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation)

First write down what you want to use it for.
In theory, the hds300 series will come out soon, I've already seen it on Ebay.
The 2202s is a bit more expensive, but there the two channels are 1-1Gsps.
naiclub:

--- Quote from: csuhi17 on January 30, 2024, 05:25:13 pm ---
--- Quote from: naiclub on January 30, 2024, 05:15:11 pm ---
--- Quote from: tunk on January 30, 2024, 04:54:33 pm ---There's quite a bit of discussion about the HDS200(0) series here:
https://www.eevblog.com/forum/testgear/owon-hds-200-handheld-oscilloscope-w-builtin-dmmawg/

--- End quote ---
https://drive.google.com/file/d/1xgQMMxsRU6Fo8YkoVMHfjo47ohSRXH5f/view?usp=drive_link
I have ZOYI ZT-702s which can measure electricity in the AC220V area directly, but I'm not sure if the OWON HDS2102S 2CH can do this or not. And another thing, the FNIRSI-1014D Can't measure 220V electricity directly either. It must pass through a special 100:1 probe wire only to be able to measure directly.

--- End quote ---

Max. input Voltage 400V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation)

First write down what you want to use it for.
In theory, the hds300 series will come out soon, I've already seen it on Ebay.
The 2202s is a bit more expensive, but there the two channels are 1-1Gsps.

--- End quote ---
Is it this model? If so, I think it's interesting. The generator emits a sound wave of 30 mags at once. Plus it's not much more expensive than the previous model.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod