Author Topic: Owon SDS7102 Screen Malfunction  (Read 1125 times)

0 Members and 1 Guest are viewing this topic.

Offline geo_leeman

  • Regular Contributor
  • *
  • Posts: 137
  • Country: us
    • Professional Website/Blog
Owon SDS7102 Screen Malfunction
« on: November 05, 2013, 09:46:40 pm »
Hello all,

I've recently acquired a new Owon SDS7102V... I decided to go with this scope over the Rigol per recommendations of several techs.  So far I've been generally satisfied, just minor annoyances with the control feel and such.  I was measuring a spectrum and all of a sudden two vertical white lines wiped across the screen and the scope completely froze! (See photos)  Cycling the soft power switch didn't do anything, I just had a white screen on boot-up.  After unplugging the unit for several minutes while I looked through the useless 'Troubleshooting' section of the manual I plugged it back in and all is well.  I repeated the measurement and left the scope measuring for several hours multiple times since with no problems.  Has anyone else seen this?

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo