EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: Trader on November 15, 2020, 02:25:10 am
-
Are there other manufacturers doing the same model?
Seems a DMM very complete because of the 600uH Inductance.
http://www.hikariferramentas.com.br/medidor-lcr-digital/274/104/ (http://www.hikariferramentas.com.br/medidor-lcr-digital/274/104/)
https://www.peaktech.de/productdetail/kategorie/lcr-messgeraet-mit-dmm/produkt/peaktech-2180.html (https://www.peaktech.de/productdetail/kategorie/lcr-messgeraet-mit-dmm/produkt/peaktech-2180.html)
-
It has a built-in LCR meter?
Seems like a compromise to me. Why not buy a separate LCR meter? It will be a lot more capable (user interface of an LCR meter is very different).
https://www.eevblog.com/forum/testgear/what-lcr-meter-should-i-get/ (https://www.eevblog.com/forum/testgear/what-lcr-meter-should-i-get/)
-
Yes, capable to measure Resistance, Capacitance, and Inductance. Don't need to be perfect.
-
Yes, capable to measure Resistance, Capacitance, and Inductance. Don't need to be perfect.
The only weak point I see is that current only goes to 600mA.
If that's OK for you then sure, why not?
-
I agree, is too low. I'm just wondering if there are more DMM+LCR like this one. Thanks.
-
Hikari ferramentas, Braziliam rebranded...
What is the measuring freq? 100hz? 1KHz?
Usually LCR meters when measuring resistance uses a constant current or AC signal?