EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: perdrix on July 11, 2020, 05:38:45 pm

Title: Pendulum CNT-90 Service Manual?
Post by: perdrix on July 11, 2020, 05:38:45 pm
Does anyone have this or know of its whereabouts?  It may also lurk under the name of the Fluke PM6690 or the Tektronix FCA3000 which were badge engineered versions.

David
Title: Re: Pendulum CNT-90 Service Manual?
Post by: coromonadalix on July 11, 2020, 06:15:14 pm
you have some infos in the fluke section,  not sure for any SV manuals

http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Fluke (http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Fluke)
Title: Re: Pendulum CNT-90 Service Manual?
Post by: YetAnotherTechie on July 13, 2020, 02:07:05 pm
this units also exists under the fluke and the philips brand-names, one of them has a complete service manual, i found 2 revisions, and there are two hardware versions(each manual has both so no prob), you can find some info using the wayback machine too. i can't help you now, i can't find my files...
Title: Re: Pendulum CNT-90 Service Manual?
Post by: coromonadalix on July 13, 2020, 02:27:30 pm
https://manualzz.com/doc/6289808/pm6690---fluke

a 9meg pdf can be downloaded   

Hope it helps


Uploaded to ko4bb,  may take a while to appear ??
Title: Re: Pendulum CNT-90 Service Manual?
Post by: coromonadalix on August 07, 2020, 08:21:58 am
Now at ko4bb   

section

Philips/PM6690_Frequency_Counter
Title: Re: Pendulum CNT-90 Service Manual?
Post by: Teti on September 09, 2020, 07:07:15 pm
Quote from: coromonadalix on July 13, 2020, 02:27:30 pm
https://manualzz.com/doc/6289808/pm6690---fluke

a 9meg pdf can be downloaded   

Hope it helps


Uploaded to ko4bb,  may take a while to appear ??

Thank you  :)
Title: Re: Pendulum CNT-90 Service Manual?
Post by: Teti on September 09, 2020, 07:21:25 pm
Do you by any chance know what is a calibration password?
Title: Re: Pendulum CNT-90 Service Manual?
Post by: DonRon on September 09, 2020, 08:21:48 pm
Hi Teti,

found the service-manual for Fluke PM6690:
https://manualzz.com/doc/6289808/pm6690---fluke

Have a look at page 7-3 The Calibration Submenu ...

"The Calibration Submenu
When used for the first time, this submenu can be activated
from the USER OPT menu after first entering the fixed pass
-word 62951413. All calibrations that can be performed manu
-ally are controlled from here. "

So maybe 62951413 might work ..

Cheers,

Ronald
Title: Re: Pendulum CNT-90 Service Manual?
Post by: noreply on September 10, 2020, 10:52:11 pm
Quote from: DonRon on September 09, 2020, 08:21:48 pm

So maybe 62951413 might work ..


Played around with an original CNT-90 some time back - can definitely confirm this code is  the default PW :-+
Title: Re: Pendulum CNT-90 Service Manual?
Post by: Teti on September 16, 2020, 02:41:49 pm
Quote from: noreply on September 10, 2020, 10:52:11 pm
Quote from: DonRon on September 09, 2020, 08:21:48 pm

So maybe 62951413 might work ..


Played around with an original CNT-90 some time back - can definitely confirm this code is  the default PW :-+
Thanks guys, cal password worked a treat!